Re: [PATCH v5 02/11] scsi: ufs: sysfs: device descriptor

From: Jaegeuk Kim
Date: Sun Feb 11 2018 - 20:07:52 EST


On 02/06, Stanislav Nijnikov wrote:
> This patch introduces a sysfs group entry for the UFS device descriptor
> parameters. The group adds "device_descriptor" folder under the UFS driver
> sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown
> as hexadecimal numbers. The full information about the parameters could be
> found at UFS specifications 2.1.
>
> Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> ---
> Documentation/ABI/testing/sysfs-driver-ufs | 223 +++++++++++++++++++++++++++++
> drivers/scsi/ufs/ufs-sysfs.c | 116 +++++++++++++++
> drivers/scsi/ufs/ufs.h | 8 ++
> drivers/scsi/ufs/ufshcd.c | 12 +-
> drivers/scsi/ufs/ufshcd.h | 6 +
> 5 files changed, 359 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-ufs
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
> new file mode 100644
> index 0000000..8da7b84
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-ufs
> @@ -0,0 +1,223 @@
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the device type. This is one of the UFS
> + device descriptor parameters. The full information about
> + the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the device class. This is one of the UFS
> + device descriptor parameters. The full information about
> + the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the UFS storage subclass. This is one of
> + the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the protocol supported by an UFS device.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows number of logical units. This is one of
> + the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows number of well known logical units.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows value that indicates whether the device is
> + enabled for boot. This is one of the UFS device descriptor
> + parameters. The full information about the descriptor could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows value that indicates whether the device
> + descriptor could be read after partial initialization phase
> + of the boot sequence. This is one of the UFS device descriptor
> + parameters. The full information about the descriptor could
> + be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows value that defines the power mode after
> + device initialization or hardware reset. This is one of
> + the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the high priority lun. This is one of
> + the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the secure removal type. This is one of
> + the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows whether the security lun is supported.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the background operations termination
> + latency. This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the initial active ICC level. This is one
> + of the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the specification version. This is one
> + of the UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the manufacturing date in BCD format.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the manufacturee ID. This is one of the
> + UFS device descriptor parameters. The full information about
> + the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the maximum number of outstanding RTTs
> + supported by the device. This is one of the UFS device
> + descriptor parameters. The full information about
> + the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the frequency and method of the realtime
> + clock update. This is one of the UFS device descriptor
> + parameters. The full information about the descriptor
> + could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows which features are supported by the device.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be
> + found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the FFU timeout. This is one of the
> + UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the device queue depth. This is one of the
> + UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the device version. This is one of the
> + UFS device descriptor parameters. The full information
> + about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows number of secure write protect areas
> + supported by the device. This is one of the UFS device
> + descriptor parameters. The full information about
> + the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the maximum amount of data that may be
> + written during the pre-soldering phase of the PSA flow.
> + This is one of the UFS device descriptor parameters.
> + The full information about the descriptor could be found
> + at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
> +Date: February 2018
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@xxxxxxx>
> +Description: This file shows the command maximum timeout for a change
> + in PSA state. This is one of the UFS device descriptor
> + parameters. The full information about the descriptor could
> + be found at UFS specifications 2.1.
> + The file is read only.
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index ce8dcb6..aa2779a 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -3,7 +3,9 @@
>
> #include <linux/err.h>
> #include <linux/string.h>
> +#include <asm/unaligned.h>
>
> +#include "ufs.h"
> #include "ufs-sysfs.h"
>
> static const char *ufschd_uic_link_state_to_string(
> @@ -134,8 +136,122 @@ static const struct attribute_group ufs_sysfs_default_group = {
> .attrs = ufs_sysfs_ufshcd_attrs,
> };
>
> +static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,
> + enum desc_idn desc_id,
> + u8 desc_index,
> + u8 param_offset,
> + u8 *sysfs_buf,
> + u8 param_size)
> +{
> + u8 desc_buf[8] = {0};
> + int ret;
> +
> + if (param_size > 8)
> + return -EINVAL;
> +
> + ret = ufshcd_read_desc_param(hba, desc_id, desc_index,
> + param_offset, desc_buf, param_size);
> + if (ret)
> + return -EINVAL;
> + switch (param_size) {
> + case 1:
> + ret = sprintf(sysfs_buf, "0x%02X\n", *desc_buf);
> + break;
> + case 2:
> + ret = sprintf(sysfs_buf, "0x%04X\n",
> + get_unaligned_be16(desc_buf));
> + break;
> + case 4:
> + ret = sprintf(sysfs_buf, "0x%08X\n",
> + get_unaligned_be32(desc_buf));
> + break;
> + case 8:
> + ret = sprintf(sysfs_buf, "0x%016llX\n",
> + get_unaligned_be64(desc_buf));
> + break;
> + }
> +
> + return ret;
> +}
> +
> +#define UFS_DESC_PARAM(_name, _puname, _duname, _size) \
> +static ssize_t _name##_show(struct device *dev, \
> + struct device_attribute *attr, char *buf) \
> +{ \
> + struct ufs_hba *hba = dev_get_drvdata(dev); \
> + return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \
> + 0, _duname##_DESC_PARAM##_puname, buf, _size); \
> +} \
> +static DEVICE_ATTR_RO(_name)
> +
> +#define UFS_DEVICE_DESC_PARAM(_name, _uname, _size) \
> + UFS_DESC_PARAM(_name, _uname, DEVICE, _size)
> +
> +UFS_DEVICE_DESC_PARAM(device_type, _DEVICE_TYPE, 1);
> +UFS_DEVICE_DESC_PARAM(device_class, _DEVICE_CLASS, 1);
> +UFS_DEVICE_DESC_PARAM(device_sub_class, _DEVICE_SUB_CLASS, 1);
> +UFS_DEVICE_DESC_PARAM(protocol, _PRTCL, 1);
> +UFS_DEVICE_DESC_PARAM(number_of_luns, _NUM_LU, 1);
> +UFS_DEVICE_DESC_PARAM(number_of_wluns, _NUM_WLU, 1);
> +UFS_DEVICE_DESC_PARAM(boot_enable, _BOOT_ENBL, 1);
> +UFS_DEVICE_DESC_PARAM(descriptor_access_enable, _DESC_ACCSS_ENBL, 1);
> +UFS_DEVICE_DESC_PARAM(initial_power_mode, _INIT_PWR_MODE, 1);
> +UFS_DEVICE_DESC_PARAM(high_priority_lun, _HIGH_PR_LUN, 1);
> +UFS_DEVICE_DESC_PARAM(secure_removal_type, _SEC_RMV_TYPE, 1);
> +UFS_DEVICE_DESC_PARAM(support_security_lun, _SEC_LU, 1);
> +UFS_DEVICE_DESC_PARAM(bkops_termination_latency, _BKOP_TERM_LT, 1);
> +UFS_DEVICE_DESC_PARAM(initial_active_icc_level, _ACTVE_ICC_LVL, 1);
> +UFS_DEVICE_DESC_PARAM(specification_version, _SPEC_VER, 2);
> +UFS_DEVICE_DESC_PARAM(manufacturing_date, _MANF_DATE, 2);
> +UFS_DEVICE_DESC_PARAM(manufacturer_id, _MANF_ID, 2);
> +UFS_DEVICE_DESC_PARAM(rtt_capability, _RTT_CAP, 1);
> +UFS_DEVICE_DESC_PARAM(rtc_update, _FRQ_RTC, 2);
> +UFS_DEVICE_DESC_PARAM(ufs_features, _UFS_FEAT, 1);
> +UFS_DEVICE_DESC_PARAM(ffu_timeout, _FFU_TMT, 1);
> +UFS_DEVICE_DESC_PARAM(queue_depth, _Q_DPTH, 1);
> +UFS_DEVICE_DESC_PARAM(device_version, _DEV_VER, 2);
> +UFS_DEVICE_DESC_PARAM(number_of_secure_wpa, _NUM_SEC_WPA, 1);
> +UFS_DEVICE_DESC_PARAM(psa_max_data_size, _PSA_MAX_DATA, 4);
> +UFS_DEVICE_DESC_PARAM(psa_state_timeout, _PSA_TMT, 1);

Could you add this case as well?

DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,

> +
> +static struct attribute *ufs_sysfs_device_descriptor[] = {
> + &dev_attr_device_type.attr,
> + &dev_attr_device_class.attr,
> + &dev_attr_device_sub_class.attr,
> + &dev_attr_protocol.attr,
> + &dev_attr_number_of_luns.attr,
> + &dev_attr_number_of_wluns.attr,
> + &dev_attr_boot_enable.attr,
> + &dev_attr_descriptor_access_enable.attr,
> + &dev_attr_initial_power_mode.attr,
> + &dev_attr_high_priority_lun.attr,
> + &dev_attr_secure_removal_type.attr,
> + &dev_attr_support_security_lun.attr,
> + &dev_attr_bkops_termination_latency.attr,
> + &dev_attr_initial_active_icc_level.attr,
> + &dev_attr_specification_version.attr,
> + &dev_attr_manufacturing_date.attr,
> + &dev_attr_manufacturer_id.attr,
> + &dev_attr_rtt_capability.attr,
> + &dev_attr_rtc_update.attr,
> + &dev_attr_ufs_features.attr,
> + &dev_attr_ffu_timeout.attr,
> + &dev_attr_queue_depth.attr,
> + &dev_attr_device_version.attr,
> + &dev_attr_number_of_secure_wpa.attr,
> + &dev_attr_psa_max_data_size.attr,
> + &dev_attr_psa_state_timeout.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ufs_sysfs_device_descriptor_group = {
> + .name = "device_descriptor",
> + .attrs = ufs_sysfs_device_descriptor,
> +};
> +
> static const struct attribute_group *ufs_sysfs_groups[] = {
> &ufs_sysfs_default_group,
> + &ufs_sysfs_device_descriptor_group,
> NULL,
> };
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index 54deeb7..6ae1e08 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -220,6 +220,14 @@ enum device_desc_param {
> DEVICE_DESC_PARAM_UD_LEN = 0x1B,
> DEVICE_DESC_PARAM_RTT_CAP = 0x1C,
> DEVICE_DESC_PARAM_FRQ_RTC = 0x1D,
> + DEVICE_DESC_PARAM_UFS_FEAT = 0x1F,
> + DEVICE_DESC_PARAM_FFU_TMT = 0x20,
> + DEVICE_DESC_PARAM_Q_DPTH = 0x21,
> + DEVICE_DESC_PARAM_DEV_VER = 0x22,
> + DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24,
> + DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
> + DEVICE_DESC_PARAM_PSA_TMT = 0x29,
> + DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
> };
>
> /*
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index e7621a0a..540a431 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2989,12 +2989,12 @@ EXPORT_SYMBOL(ufshcd_map_desc_id_to_length);
> *
> * Return 0 in case of success, non-zero otherwise
> */
> -static int ufshcd_read_desc_param(struct ufs_hba *hba,
> - enum desc_idn desc_id,
> - int desc_index,
> - u8 param_offset,
> - u8 *param_read_buf,
> - u8 param_size)
> +int ufshcd_read_desc_param(struct ufs_hba *hba,
> + enum desc_idn desc_id,
> + int desc_index,
> + u8 param_offset,
> + u8 *param_read_buf,
> + u8 param_size)
> {
> int ret;
> u8 *desc_buf;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 53e2779..38c307d 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -841,6 +841,12 @@ static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
> }
>
> /* Expose Query-Request API */
> +int ufshcd_read_desc_param(struct ufs_hba *hba,
> + enum desc_idn desc_id,
> + int desc_index,
> + u8 param_offset,
> + u8 *param_read_buf,
> + u8 param_size);
> int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
> enum flag_idn idn, bool *flag_res);
> int ufshcd_hold(struct ufs_hba *hba, bool async);
> --
> 2.7.4