[PATCH v3 2/3] arm64: dts: uniphier: add speaker out for UniPhier LD11/LD20 boards

From: Katsuhiro Suzuki
Date: Tue Feb 13 2018 - 08:02:10 EST


This patch adds codec node for TI TAS571x on UniPhier LD11/20
global boards. And adds settings of AIO for speaker out.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>

---

Changes in v3:
- Use phandle of endpoint directly instead of port node
---
.../boot/dts/socionext/uniphier-ld11-global.dts | 21 +++++++++++++++++++++
.../boot/dts/socionext/uniphier-ld20-global.dts | 21 +++++++++++++++++++++
2 files changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index fb6bf435dc96..f057ee80f38e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -10,6 +10,7 @@

/dts-v1/;
#include "uniphier-ld11.dtsi"
+#include "dt-bindings/gpio/uniphier-gpio.h"

/ {
model = "UniPhier LD11 Global Board (REF_LD11_GP)";
@@ -44,6 +45,7 @@
widgets = "Headphone", "Headphone Jack";

dais = <&i2s_port2
+ &i2s_port3
&i2s_port4
&spdif_port0>;
};
@@ -71,6 +73,20 @@
&i2c0 {
status = "okay";

+ tas5707a@1d {
+ compatible = "ti,tas5711";
+ reg = <0x1d>;
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
+ pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ tas_speaker: endpoint {
+ remote-endpoint = <&i2s_hpcmout1>;
+ };
+ };
+ };
+
eeprom@50 {
compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
@@ -94,6 +110,11 @@
status = "okay";
};

+&i2s_hpcmout1 {
+ dai-format = "i2s";
+ remote-endpoint = <&tas_speaker>;
+};
+
&spdif_hiecout1 {
remote-endpoint = <&spdif_tx>;
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 2d49163cfde4..b2e197bc968c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -10,6 +10,7 @@

/dts-v1/;
#include "uniphier-ld20.dtsi"
+#include "dt-bindings/gpio/uniphier-gpio.h"

/ {
model = "UniPhier LD20 Global Board (REF_LD20_GP)";
@@ -44,6 +45,7 @@
widgets = "Headphone", "Headphone Jack";

dais = <&i2s_port2
+ &i2s_port3
&i2s_port4
&spdif_port0>;
};
@@ -70,12 +72,31 @@

&i2c0 {
status = "okay";
+
+ tas5707@1b {
+ compatible = "ti,tas5711";
+ reg = <0x1b>;
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+ pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ tas_speaker: endpoint {
+ remote-endpoint = <&i2s_hpcmout1>;
+ };
+ };
+ };
};

&nand {
status = "okay";
};

+&i2s_hpcmout1 {
+ dai-format = "i2s";
+ remote-endpoint = <&tas_speaker>;
+};
+
&spdif_hiecout1 {
remote-endpoint = <&spdif_tx>;
};
--
2.15.1