[PATCH V3 00/19] lightnvm: pblk: implement 2.0 support

From: Javier GonzÃlez
Date: Mon Feb 26 2018 - 08:19:34 EST


# Changes since V2:

Apply Matias' feedback:
- Remove generic nvm_id identify structure.
- Do not remap capabilities (cap) to media and controlled capabilities
(mccap). Instead, add a comment to prevent confusion when
crosschecking with 2.0 spec.
- Change maxoc and maxocpu defaults from 1 block to the max number of
blocks.
- Re-implement the generic geometry to use nvm_geo on both device and
targets. Maintain nvm_common_geo to make it easier to copy the common
part of the geometry (without having to overwrite target-specific
fields, which is ugly and error prone). Matias, if you still want to
get rid of this, we can do it.
- Re-order patches with renaming to make them more meaningful. These
belong to the series, since the name changes are motivated by 2.0
inclusions. The only exception would be 36d10bfd3234, but I hope it
is OK I include it here.

Also,
- Eliminate a dependency between luns and lines in the init/exit
refactoring.
- Use the global address format when possible to avoid defaulting on
the 1.2 path. This will safe headaches if the address format changes
at some point.

I took out the patch allowing to do bit shifts on non power-of-2 media
formats on pblk's mapping since it requires touching many places that
are not 2.0 related. I'll submit this separately.

# Changes since V1:

Apply Matias' feedback:
- Rebase on top of Matias' latest patches.
- Use nvme_get_log_ext to submit report chunk and export it.
- Re-write report chunk based on Matias' suggestions. Here, I
maintained the lba interface, but it was necessary to redo the
address formatting to match the chunk log page format. For pblk,
this means a double address transformation, but it enables the
standard path to use lbas, plus, this is not in the fast path.
- Fold address format together with address transformations.
- Split the generic geometry patch in different patches.
- Remove refactoring of ligthnvm's core sysfs.

Feedback not applied:
- Not letting pblk know about 1.2 and 2.0 bad block paths.
Since the interfaces for get/set bad block and report chunk are so
different, moving this logic to core adds assumptions on how the
targets would want to get the data back. A way of doing this is
creating a logical report chunk on the 1.2 path, but this would
mean that values like the wear-index are invalid, which requires
the target knowledge. I'm open to suggestions here.

Also:
- Do some further renamings
- Create a generic address format to make it explicit where we share
1.2 and 2.0 fields to avoid address formatting in the fast path.
- Add new fields to sysfs to complete spec and show major/minor
versions (version and subversion to respect current interface).

Implement 2.0 support in pblk. This includes the address formatting and
mapping paths, as well as the sysfs entries for them.

Javier

Javier GonzÃlez (19):
lightnvm: simplify geometry structure.
lightnvm: add controller capabilities to 2.0
lightnvm: add minor version to generic geometry
lightnvm: add shorten OCSSD version in geo
lightnvm: complete geo structure with maxoc*
lightnvm: pblk: check for supported version
lightnvm: complete 2.0 values in sysfs
lightnvm: rename number of channels and luns
lightnvm: rename sect_* to sec_*
lightnvm: add support for 2.0 address format
lightnvm: pblk: rename ppaf* to addrf*
lightnvn: pblk: use generic address format
lightnvm: make address conversions depend on generic device
nvme: make nvme_get_log_ext available
lightnvm: implement get log report chunk helpers
lightnvm: define chunk states
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: refactor init/exit sequences
lightnvm: pblk: implement 2.0 support

drivers/lightnvm/core.c | 199 +++++-----
drivers/lightnvm/pblk-core.c | 151 +++++--
drivers/lightnvm/pblk-gc.c | 2 +-
drivers/lightnvm/pblk-init.c | 833 +++++++++++++++++++++++----------------
drivers/lightnvm/pblk-map.c | 4 +-
drivers/lightnvm/pblk-read.c | 2 +-
drivers/lightnvm/pblk-recovery.c | 14 +-
drivers/lightnvm/pblk-rl.c | 2 +-
drivers/lightnvm/pblk-sysfs.c | 134 ++++++-
drivers/lightnvm/pblk-write.c | 2 +-
drivers/lightnvm/pblk.h | 255 ++++++++----
drivers/nvme/host/lightnvm.c | 458 ++++++++++++++-------
drivers/nvme/host/nvme.h | 3 +
include/linux/lightnvm.h | 338 ++++++++++------
14 files changed, 1559 insertions(+), 838 deletions(-)

--
2.7.4