Re: [PATCH v1 18/19] arm: dts: mt7623: add MT7623A reference boards

[Rob Herring]

On Fri, Feb 23, 2018 at 06:16:38PM +0800, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
> 
> Add mt7623a-rfb.dtsi where most nodes can be inherited from
> mt7623n-rfb.dtsi and keep these distinctions from MT7623A boards in
> mt7623a-rfb.dtsi for most definition can be reused among MT7623A board
> variants.
> 
> MT7623A has its specific definition of power domain and thus we need
> to change related devices such as audio, ethernet, crypto, high-speed
> DMA, NAND, and USB controller to the power domain they specifically
> belong to. In addition, MT7530 exists as built-in module inside MT7623A
> SoC and I2C2 and UART[0-1] get being removed and UART2 have distinct pin
> usage. Those all differences can be totally seen in mt7623a-rfb.dtsi.
> 
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile             |  2 +
>  arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 22 +++++++++
>  arch/arm/boot/dts/mt7623a-rfb-nand.dts | 26 +++++++++++
>  arch/arm/boot/dts/mt7623a-rfb.dtsi     | 84 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/mt7623n-rfb.dtsi     | 15 ++++++
>  5 files changed, 149 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mt7623a-rfb-emmc.dts
>  create mode 100644 arch/arm/boot/dts/mt7623a-rfb-nand.dts
>  create mode 100644 arch/arm/boot/dts/mt7623a-rfb.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5af6fce..818817c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1122,6 +1122,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  	mt6580-evbp1.dtb \
>  	mt6589-aquaris5.dtb \
>  	mt6592-evb.dtb \
> +	mt7623a-rfb-emmc.dtb \
> +	mt7623a-rfb-nand.dtb \
>  	mt7623n-rfb-emmc.dtb \
>  	mt7623n-rfb-nand.dtb \
>  	mt7623n-bananapi-bpi-r2.dtb \
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> new file mode 100644
> index 0000000..ef6398e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017-2018 MediaTek Inc.
> + * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt7623a-rfb.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7623A with eMMC reference board";
> +	compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";

Use stdout-path instead. earlyprintk option only works for a kernel 
built with a debug uart at a fixed address, so drop it.

> +	};
> +};
> +
> +&mmc0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> new file mode 100644
> index 0000000..592d5d7
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017-2018 MediaTek Inc.
> + * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt7623a-rfb.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7623A with NAND reference board";
> +	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";

ditto.

> +	};
> +};
> +
> +&bch {
> +	status = "okay";
> +};
> +
> +&nandc {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mt7623a-rfb.dtsi b/arch/arm/boot/dts/mt7623a-rfb.dtsi
> new file mode 100644
> index 0000000..3a15c46
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7623a-rfb.dtsi
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017-2018 MediaTek Inc.
> + * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
> + *
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/power/mt7623a-power.h>
> +#include "mt7623n-rfb.dtsi"
> +
> +/ {
> +	memory {

Unit-address?

> +		device_type = "memory";
> +		reg = <0 0x80000000 0 0x20000000>;
> +	};
> +};
> +
> +&afe {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
> +};
> +
> +&cir {
> +	status = "disabled";
> +};
> +
> +&crypto {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
> +};
> +
> +&eth {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
> +};
> +
> +&hsdma {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins_b>;
> +};
> +
> +&mt7530 {
> +	mediatek,mcm;
> +	resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
> +	reset-names = "mcm";
> +};
> +
> +&nandc {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
> +};
> +
> +&pcie {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
> +};
> +
> +&scpsys {
> +	compatible = "mediatek,mt7623a-scpsys",
> +		     "syscon";
> +	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
> +	clock-names = "ethif";
> +};
> +
> +&uart0 {
> +	status = "disabled";
> +};
> +
> +&uart1 {
> +	status = "disabled";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins_b>;
> +};
> +
> +&usb1 {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
> +};
> +
> +&usb2 {
> +	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
> +};
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> index 0237476..07ed15d 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -380,6 +380,14 @@
>  		};
>  	};
>  
> +	i2c2_pins_b: i2c2-alt {
> +		pin-i2c2 {
> +			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
> +				 <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
> +			bias-disable;
> +		};
> +	};
> +
>  	i2s0_pins_a: i2s0-default {
>  		pin-i2s0 {
>  			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
> @@ -629,6 +637,13 @@
>  				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
>  		};
>  	};
> +
> +	uart2_pins_b: uart2-alt {
> +		pins-dat {
> +			pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
> +				 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
> +		};
> +	};
>  };
>  
>  &pwm {
> -- 
> 2.7.4
>