[PATCH v5 13/36] drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panel

From: Enric Balletbo i Serra
Date: Fri Mar 09 2018 - 17:31:48 EST


From: Lin Huang <hl@xxxxxxxxxxxxxx>

When panel is shut down, we should make sure edp can be disabled to avoid
undefined behavior.

Cc: StÃphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 92fb9a072cb6..3a222e7e46ee 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1160,6 +1160,12 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)

pm_runtime_get_sync(dp->dev);

+ ret = clk_prepare_enable(dp->clock);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
+ goto out_dp_clk_pre;
+ }
+
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);

@@ -1191,6 +1197,8 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
+ clk_disable_unprepare(dp->clock);
+out_dp_clk_pre:
pm_runtime_put_sync(dp->dev);

return ret;
@@ -1233,11 +1241,14 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
}

disable_irq(dp->irq);
+ analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
phy_power_off(dp->phy);

if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);

+ clk_disable_unprepare(dp->clock);
+
pm_runtime_put_sync(dp->dev);

ret = analogix_dp_prepare_panel(dp, false, true);
--
2.16.1