[PATCH 4.9 02/67] iio: st_pressure: st_accel: pass correct platform data to init

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Nosthoff <committed@xxxxxxxx>

commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream.

Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.

This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.

This commit fixes this.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@xxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/iio/accel/st_accel_core.c       |    2 +-
 drivers/iio/pressure/st_pressure_core.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -858,7 +858,7 @@ int st_accel_common_probe(struct iio_dev
 	if (!pdata)
 		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_accel_power_off;
 
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -678,7 +678,7 @@ int st_press_common_probe(struct iio_dev
 	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
 		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_press_power_off;