[PATCH 1/2] tty: n_gsm: Fix long delays with control frame timeouts in ADM mode

From: Tony Lindgren
Date: Sat Apr 07 2018 - 13:20:08 EST


Commit ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for
control dlci") added support for DLCI to stay in Asynchronous Disconnected
Mode (ADM). But we still get long delays waiting for commands to other
DLCI to complete:

--> 5) C: SABM(P)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
...

This happens because gsm_control_send() sets cretries timer to T2 that is
by default set to 34. This will cause resend for T2 times for the control
frame. In ADM mode, we will never get a response so the control frame, so
retries are just delaying all the commands.

Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM
mode for the control DLCI. Then we can use that in gsm_control_send() to
set retries to 1. This means the control frame will be sent once allowing
the other end at an opportunity to switch from ADM to ABM mode.

Note that retries will be decremented in gsm_control_retransmit() so
we don't want to set it to 0 here.

Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for
control dlci")
Cc: linux-serial@xxxxxxxxxxxxxxx
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxx>
Cc: Dan Williams <dcbw@xxxxxxxxxx>
Cc: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxx>
Cc: Marcel Partap <mpartap@xxxxxxx>
Cc: Merlijn Wajer <merlijn@xxxxxxxxxx>
Cc: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Cc: Michael Scott <michael.scott@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
Cc: Russ Gorby <russ.gorby@xxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/tty/n_gsm.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -121,6 +121,9 @@ struct gsm_dlci {
struct mutex mutex;

/* Link layer */
+ int mode;
+#define DLCI_MODE_ABM 0 /* Normal Asynchronous Balanced Mode */
+#define DLCI_MODE_ADM 1 /* Asynchronous Disconnected Mode */
spinlock_t lock; /* Protects the internal state */
struct timer_list t1; /* Retransmit timer for SABM and UA */
int retries;
@@ -1364,7 +1367,13 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
ctrl->data = data;
ctrl->len = clen;
gsm->pending_cmd = ctrl;
- gsm->cretries = gsm->n2;
+
+ /* If DLCI0 is in ADM mode skip retries, it won't respond */
+ if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
+ gsm->cretries = 1;
+ else
+ gsm->cretries = gsm->n2;
+
mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
gsm_control_transmit(gsm, ctrl);
spin_unlock_irqrestore(&gsm->control_lock, flags);
@@ -1472,6 +1481,7 @@ static void gsm_dlci_t1(struct timer_list *t)
if (debug & 8)
pr_info("DLCI %d opening in ADM mode.\n",
dlci->addr);
+ dlci->mode = DLCI_MODE_ADM;
gsm_dlci_open(dlci);
} else {
gsm_dlci_close(dlci);
--
2.17.0