[PATCH] net: dsa: b53: Replace mdelay with msleep in b53_switch_reset_gpio

From: Jia-Ju Bai
Date: Tue Apr 10 2018 - 21:51:44 EST


b53_switch_reset_gpio() is never called in atomic context.

The call chain ending up at b53_switch_reset_gpio() is:
[1] b53_switch_reset_gpio() <- b53_switch_reset() <-
b53_reset_switch() <- b53_setup()

b53_switch_reset_gpio() is set as ".setup" in struct dsa_switch_ops.
This function is not called in atomic context.

Despite never getting called from atomic context, b53_switch_reset_gpio()
calls mdelay() to busily wait.
This is not necessary and can be replaced with msleep() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
---
drivers/net/dsa/b53/b53_common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 274f367..e070ff6 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -597,10 +597,10 @@ static void b53_switch_reset_gpio(struct b53_device *dev)
/* Reset sequence: RESET low(50ms)->high(20ms)
*/
gpio_set_value(gpio, 0);
- mdelay(50);
+ msleep(50);

gpio_set_value(gpio, 1);
- mdelay(20);
+ msleep(20);

dev->current_page = 0xff;
}
--
1.9.1