Re: [PATCH] staging: pi433: add descriptions for mutex locks

[Marcus Wolf]

Am 12.04.2018 um 19:15 schrieb Valentin Vidic:
> On Sun, Apr 08, 2018 at 04:15:30PM +0200, Marcus Wolf wrote:
>> The hardware of Pi433 is working with every Raspberry Pi (on zero, you
>> need to solder the GPIO-pins) and with several other fruits like banana
>> pi. The only thing is, that you need different versions of the driver,
>> according to the processor, mounted on your fruit.
>>
>> If you'd like to test more then ther is no hang up or crash, you will
>> need a second party. You could use a 433MHz socket for testing TX or a
>> 433 thermometer for testing RX. An example code for communication with a
>> socket is available on the Pi433 productpage (www.pi433.de). The sample
>> for the thermometer isn't published yet (as always lack of time).
>>
>> If you want to test more deeply (using different features of the Rf69
>> chip or even do some long time testing, you have more options, if you
>> use to Pis with Pi433.
>>
>> Just let me know, what you'd like to do and what equipment, you need.
> 
> At the moment I have Rpi2 but not any other 433MHz equipment, so I
> could only do some basic testing unfortunately.  In case I get the
> new Rpi3 some time soon I would be able to do something better.
> 
Hi Valentin,



let me know, what you like to have. For sure with just one station and
no other 433MHz equipment, options for testing are quite limited.



Marcus

-- 
Smarthome-Wolf UG (haftungsbeschrÃnkt)
Helene-Lange-Weg 23
80637 MÃnchen
Amtsgericht MÃnchen, HRB 223529
Umastzsteuer-ID: DE304719911
GeschÃftsfÃhrer: Marcus Wolf