[PATCH 2/8] dt-bindings: display: bridge: thc63lvd1024: Add lvds map property

From: Jacopo Mondi
Date: Thu Apr 19 2018 - 05:36:30 EST


The THC63LVD1024 LVDS to RGB bridge supports two different input mapping
modes, selectable by means of an external pin.

Describe the LVDS mode map through a newly defined mandatory property in
device tree bindings.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
.../devicetree/bindings/display/bridge/thine,thc63lvd1024.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
index 37f0c04..0937595 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -12,6 +12,8 @@ Required properties:
- compatible: Shall be "thine,thc63lvd1024"
- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
PPL and digital circuitry
+- thine,map: LVDS mapping mode selection signal, pin name "MAP". Shall be <1>
+ for mapping mode 1, <0> for mapping mode 2

Optional properties:
- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
@@ -36,6 +38,7 @@ Example:

vcc-supply = <&reg_lvds_vcc>;
powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ thine,map = <1>;

ports {
#address-cells = <1>;
--
2.7.4