Re: [PATCH] serial: imx: enable IMX21_UCR3_RXDMUXSEL for non-dte-mode

[Uwe Kleine-König]

Hello Chris,

On Fri, Apr 20, 2018 at 09:07:59AM +0800, Chris Ruehl wrote:
> Fix a problem introduced with
> commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off")
> result in non dte-mode imx-uart fail receive data.
> By add back IMX21_UCR3_RXDMUXSEL the serial port works as expected.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
> ---
>  drivers/tty/serial/imx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 91f3a1a..3d09933 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1391,7 +1391,7 @@ static int imx_uart_startup(struct uart_port *port)
>  
>  		ucr3 = imx_uart_readl(sport, UCR3);
>  
> -		ucr3 |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
> +		ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
>  
>  		if (sport->dte_mode)
>  			/* disable broken interrupts */

Doesn't 6df765dca378bddf994cfd2044acafa501bd800f fix this for you?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |