[PATCH 11/18] thermal: exynos: add exynos*_tmu_set_[trip,hyst]() helpers

From: Bartlomiej Zolnierkiewicz
Date: Thu Apr 26 2018 - 07:52:58 EST


Add exynos*_tmu_set_[trip,hyst]() helpers and convert
all ->tmu_initialize implementations accordingly.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/thermal/samsung/exynos_tmu.c | 282 +++++++++++++++++------------------
1 file changed, 140 insertions(+), 142 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 82484c5..80265d2 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -305,30 +305,6 @@ static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
EXYNOS_TMU_TEMP_MASK;
}

-static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
-{
- struct thermal_zone_device *tz = data->tzd;
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tz);
- unsigned long temp;
- int i, ntrips = min_t(int, of_thermal_get_ntrips(tz), data->ntrip);
-
- for (i = 0; i < ntrips; i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL)
- continue;
-
- temp = trips[i].temperature / MCELSIUS;
- if (falling)
- temp -= (trips[i].hysteresis / MCELSIUS);
- else
- threshold &= ~(0xff << 8 * i);
-
- threshold |= temp_to_code(data, temp) << 8 * i;
- }
-
- return threshold;
-}
-
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -411,37 +387,79 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
mutex_unlock(&data->lock);
}

+static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ const struct thermal_trip * const trips =
+ of_thermal_get_trip_points(data->tzd);
+ u8 ref, th_code;
+
+ ref = trips[0].temperature / MCELSIUS;
+
+ if (trip == 0) {
+ th_code = temp_to_code(data, ref);
+ writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+ }
+
+ temp -= ref;
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+}
+
static void exynos4210_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
of_thermal_get_trip_points(tz);
- int threshold_code, i;
- unsigned long reference, temp;
+ unsigned long temp;
+ int i;

sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));

- /* Write temperature code for threshold */
- reference = trips[0].temperature / MCELSIUS;
- threshold_code = temp_to_code(data, reference);
- writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
-
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
temp = trips[i].temperature / MCELSIUS;
- writeb(temp - reference, data->base +
- EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
+ exynos4210_tmu_set_trip_temp(data, i, temp);
+ }
+}
+
+static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ u32 th, con;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 8 * trip);
+ th |= temp_to_code(data, temp) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ if (trip == 3) {
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
}

+static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_FALL);
+ th &= ~(0xff << 8 * trip);
+ if (hyst)
+ th |= temp_to_code(data, temp - hyst) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_FALL);
+}
+
static void exynos4412_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
- of_thermal_get_trip_points(data->tzd);
- unsigned int trim_info, con, ctrl, rising_threshold;
- int threshold_code, i;
- unsigned long crit_temp = 0;
+ of_thermal_get_trip_points(tz);
+ unsigned long temp, hyst;
+ unsigned int trim_info, ctrl;
+ int i, ntrips = min_t(int, of_thermal_get_ntrips(tz), data->ntrip);

if (data->soc == SOC_ARCH_EXYNOS3250 ||
data->soc == SOC_ARCH_EXYNOS4412 ||
@@ -465,27 +483,53 @@ static void exynos4412_tmu_initialize(struct platform_device *pdev)
sanitize_temp_error(data, trim_info);

/* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
-
- /* if last threshold limit is also present */
- for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL) {
- crit_temp = trips[i].temperature;
- break;
- }
+ for (i = 0; i < ntrips; i++) {
+ temp = trips[i].temperature / MCELSIUS;
+ exynos4412_tmu_set_trip_temp(data, i, temp);
+
+ hyst = trips[i].hysteresis / MCELSIUS;
+ exynos4412_tmu_set_trip_hyst(data, i, temp, hyst);
}
+}

- threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, j;
+ u32 th;
+
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp) << j * 8);
+ writel(th, data->base + reg_off);
+}
+
+static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, j;
+ u32 th;
+
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp - hyst) << j * 8);
+ writel(th, data->base + reg_off);
}

static void exynos5433_tmu_initialize(struct platform_device *pdev)
@@ -493,9 +537,7 @@ static void exynos5433_tmu_initialize(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int temp, temp_hist;
- int threshold_code, i, sensor_id, cal_type;
+ int sensor_id, cal_type, i, temp, hyst;

trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
@@ -525,111 +567,67 @@ static void exynos5433_tmu_initialize(struct platform_device *pdev)

/* Write temperature code for rising and falling threshold */
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- int rising_reg_offset, falling_reg_offset;
- int j = 0;
-
- switch (i) {
- case 0:
- case 1:
- case 2:
- case 3:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
- j = i;
- break;
- case 4:
- case 5:
- case 6:
- case 7:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
- j = i - 4;
- break;
- default:
- continue;
- }
-
/* Write temperature code for rising threshold */
tz->ops->get_trip_temp(tz, i, &temp);
temp /= MCELSIUS;
- threshold_code = temp_to_code(data, temp);
-
- rising_threshold = readl(data->base + rising_reg_offset);
- rising_threshold &= ~(0xff << j * 8);
- rising_threshold |= (threshold_code << j * 8);
- writel(rising_threshold, data->base + rising_reg_offset);
+ exynos5433_tmu_set_trip_temp(data, i, temp);

/* Write temperature code for falling threshold */
- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
- threshold_code = temp_to_code(data, temp_hist);
-
- falling_threshold = readl(data->base + falling_reg_offset);
- falling_threshold &= ~(0xff << j * 8);
- falling_threshold |= (threshold_code << j * 8);
- writel(falling_threshold, data->base + falling_reg_offset);
+ tz->ops->get_trip_hyst(tz, i, &hyst);
+ hyst /= MCELSIUS;
+ exynos5433_tmu_set_trip_hyst(data, i, temp, hyst);
}
}

+static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
+
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
+
+ th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+}
+
+static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
+
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
+
+ th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+}
+
static void exynos7_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int threshold_code, i;
- int temp, temp_hist;
- unsigned int reg_off, bit_off;
+ int i, temp, hyst;

trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);

/* Write temperature code for rising and falling threshold */
for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
- /*
- * On exynos7 there are 4 rising and 4 falling threshold
- * registers (0x50-0x5c and 0x60-0x6c respectively). Each
- * register holds the value of two threshold levels (at bit
- * offsets 0 and 16). Based on the fact that there are atmost
- * eight possible trigger levels, calculate the register and
- * bit offsets where the threshold levels are to be written.
- *
- * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
- * [24:16] - Threshold level 7
- * [8:0] - Threshold level 6
- * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
- * [24:16] - Threshold level 5
- * [8:0] - Threshold level 4
- *
- * and similarly for falling thresholds.
- *
- * Based on the above, calculate the register and bit offsets
- * for rising/falling threshold levels and populate them.
- */
- reg_off = ((7 - i) / 2) * 4;
- bit_off = ((8 - i) % 2);
-
tz->ops->get_trip_temp(tz, i, &temp);
temp /= MCELSIUS;
+ exynos7_tmu_set_trip_temp(data, i, temp);

- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
-
- /* Set 9-bit temperature code for rising threshold levels */
- threshold_code = temp_to_code(data, temp);
- rising_threshold = readl(data->base +
- EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
- rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- rising_threshold |= threshold_code << (16 * bit_off);
- writel(rising_threshold,
- data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
-
- /* Set 9-bit temperature code for falling threshold levels */
- threshold_code = temp_to_code(data, temp_hist);
- falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- falling_threshold |= threshold_code << (16 * bit_off);
- writel(falling_threshold,
- data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ tz->ops->get_trip_hyst(tz, i, &hyst);
+ hyst /= MCELSIUS;
+ exynos7_tmu_set_trip_hyst(data, i, temp, hyst);
}
}

--
1.9.1