[PATCH 05/15] drm/sun4i: Add TCON TOP driver

From: Jernej Skrabec
Date: Sat May 19 2018 - 13:39:21 EST


As already described in DT binding, TCON TOP is responsible for
configuring display pipeline. In this initial driver focus is on HDMI
pipeline, so TVE and LCD configuration is not implemented.

Implemented features:
- HDMI source selection
- clock driver (TCON and DSI gating)
- connecting mixers and TCONS

Something similar also existed in previous SoCs, except that it was part
of first TCON.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/gpu/drm/sun4i/Makefile | 3 +-
drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 256 +++++++++++++++++++++
drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 20 ++
include/dt-bindings/clock/sun8i-tcon-top.h | 11 +
4 files changed, 289 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c
create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h
create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 2589f4acd5ae..09fbfd6304ba 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -16,7 +16,8 @@ sun8i-drm-hdmi-y += sun8i_hdmi_phy_clk.o

sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \
sun8i_vi_layer.o sun8i_ui_scaler.o \
- sun8i_vi_scaler.o sun8i_csc.o
+ sun8i_vi_scaler.o sun8i_csc.o \
+ sun8i_tcon_top.o

sun4i-tcon-y += sun4i_crtc.o
sun4i-tcon-y += sun4i_dotclock.o
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
new file mode 100644
index 000000000000..075a356a6dfa
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@xxxxxxxx> */
+
+#include <drm/drmP.h>
+
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#include "sun8i_tcon_top.h"
+
+#define TCON_TOP_PORT_SEL_REG 0x1C
+#define TCON_TOP_PORT_DE0_MSK GENMASK(1, 0)
+#define TCON_TOP_PORT_DE1_MSK GENMASK(5, 4)
+#define TCON_TOP_PORT_TCON_LCD0 0
+#define TCON_TOP_PORT_TCON_LCD1 1
+#define TCON_TOP_PORT_TCON_TV0 2
+#define TCON_TOP_PORT_TCON_TV1 3
+
+#define TCON_TOP_GATE_SRC_REG 0x20
+#define TCON_TOP_HDMI_SRC_MSK GENMASK(29, 28)
+#define TCON_TOP_HDMI_SRC_NONE 0
+#define TCON_TOP_HDMI_SRC_TCON_TV0 1
+#define TCON_TOP_HDMI_SRC_TCON_TV1 2
+#define TCON_TOP_TCON_TV1_GATE 24
+#define TCON_TOP_TCON_TV0_GATE 20
+#define TCON_TOP_TCON_DSI_GATE 16
+
+#define CLK_NUM 3
+
+struct sun8i_tcon_top {
+ struct clk *bus;
+ void __iomem *regs;
+ struct reset_control *rst;
+
+ /*
+ * spinlock is used for locking access to registers from different
+ * places - tcon driver and clk subsystem.
+ */
+ spinlock_t reg_lock;
+};
+
+struct sun8i_tcon_top_gate {
+ const char *name;
+ u8 bit;
+ int index;
+};
+
+static const struct sun8i_tcon_top_gate gates[] = {
+ {"bus-tcon-top-dsi", TCON_TOP_TCON_DSI_GATE, CLK_BUS_TCON_TOP_DSI},
+ {"bus-tcon-top-tv0", TCON_TOP_TCON_TV0_GATE, CLK_BUS_TCON_TOP_TV0},
+ {"bus-tcon-top-tv1", TCON_TOP_TCON_TV1_GATE, CLK_BUS_TCON_TOP_TV1},
+};
+
+void sun8i_tcon_top_set_hdmi_src(struct sun8i_tcon_top *tcon_top, int tcon)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (tcon > 1) {
+ DRM_ERROR("TCON index is too high!\n");
+ return;
+ }
+
+ spin_lock_irqsave(&tcon_top->reg_lock, flags);
+
+ val = readl(tcon_top->regs + TCON_TOP_GATE_SRC_REG);
+ val &= ~TCON_TOP_HDMI_SRC_MSK;
+ val |= FIELD_PREP(TCON_TOP_HDMI_SRC_MSK,
+ TCON_TOP_HDMI_SRC_TCON_TV0 + tcon);
+ writel(val, tcon_top->regs + TCON_TOP_GATE_SRC_REG);
+
+ spin_unlock_irqrestore(&tcon_top->reg_lock, flags);
+}
+
+void sun8i_tcon_top_de_config(struct sun8i_tcon_top *tcon_top,
+ int mixer, enum tcon_type tcon_type, int tcon)
+{
+ unsigned long flags;
+ u32 val, reg;
+
+ if (mixer > 1) {
+ DRM_ERROR("Mixer index is too high!\n");
+ return;
+ }
+
+ if (tcon > 1) {
+ DRM_ERROR("TCON index is too high!\n");
+ return;
+ }
+
+ switch (tcon_type) {
+ case tcon_type_lcd:
+ val = TCON_TOP_PORT_TCON_LCD0 + tcon;
+ break;
+ case tcon_type_tv:
+ val = TCON_TOP_PORT_TCON_TV0 + tcon;
+ break;
+ default:
+ DRM_ERROR("Invalid TCON type!\n");
+ return;
+ }
+
+ spin_lock_irqsave(&tcon_top->reg_lock, flags);
+
+ reg = readl(tcon_top->regs + TCON_TOP_PORT_SEL_REG);
+ if (mixer == 0) {
+ reg &= ~TCON_TOP_PORT_DE0_MSK;
+ reg |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, val);
+ } else {
+ reg &= ~TCON_TOP_PORT_DE1_MSK;
+ reg |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, val);
+ }
+ writel(reg, tcon_top->regs + TCON_TOP_PORT_SEL_REG);
+
+ spin_unlock_irqrestore(&tcon_top->reg_lock, flags);
+}
+
+static int sun8i_tcon_top_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *clk_data;
+ struct sun8i_tcon_top *tcon_top;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret, i;
+
+ tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
+ if (!tcon_top)
+ return -ENOMEM;
+
+ clk_data = devm_kzalloc(&pdev->dev, sizeof(*clk_data) +
+ sizeof(*clk_data->hws) * CLK_NUM,
+ GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ spin_lock_init(&tcon_top->reg_lock);
+
+ tcon_top->rst = devm_reset_control_get(dev, "rst");
+ if (IS_ERR(tcon_top->rst)) {
+ dev_err(dev, "Couldn't get our reset line\n");
+ return PTR_ERR(tcon_top->rst);
+ }
+
+ tcon_top->bus = devm_clk_get(dev, "bus");
+ if (IS_ERR(tcon_top->bus)) {
+ dev_err(dev, "Couldn't get the bus clock\n");
+ return PTR_ERR(tcon_top->bus);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tcon_top->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(tcon_top->regs))
+ return PTR_ERR(tcon_top->regs);
+
+ ret = reset_control_deassert(tcon_top->rst);
+ if (ret) {
+ dev_err(dev, "Could not deassert ctrl reset control\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(tcon_top->bus);
+ if (ret) {
+ dev_err(dev, "Could not enable bus clock\n");
+ goto err_assert_reset;
+ }
+
+ /*
+ * Default register values might have some reserved bits set, which
+ * prevents TCON TOP from working properly. Set them to 0 here.
+ */
+ writel(0, tcon_top->regs + TCON_TOP_PORT_SEL_REG);
+ writel(0, tcon_top->regs + TCON_TOP_GATE_SRC_REG);
+
+ for (i = 0; i < CLK_NUM; i++) {
+ const char *parent_name = "bus-tcon-top";
+ struct clk_init_data init;
+ struct clk_gate *gate;
+
+ gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_disable_clock;
+ }
+
+ init.name = gates[i].name;
+ init.ops = &clk_gate_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ gate->reg = tcon_top->regs + TCON_TOP_GATE_SRC_REG;
+ gate->bit_idx = gates[i].bit;
+ gate->lock = &tcon_top->reg_lock;
+ gate->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &gate->hw);
+ if (ret)
+ goto err_disable_clock;
+
+ clk_data->hws[gates[i].index] = &gate->hw;
+ }
+
+ clk_data->num = CLK_NUM;
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+ if (ret)
+ goto err_disable_clock;
+
+ platform_set_drvdata(pdev, tcon_top);
+
+ return 0;
+
+err_disable_clock:
+ clk_disable_unprepare(tcon_top->bus);
+err_assert_reset:
+ reset_control_assert(tcon_top->rst);
+
+ return ret;
+}
+
+static int sun8i_tcon_top_remove(struct platform_device *pdev)
+{
+ struct sun8i_tcon_top *tcon_top = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(tcon_top->bus);
+ reset_control_assert(tcon_top->rst);
+
+ return 0;
+}
+
+const struct of_device_id sun8i_tcon_top_of_table[] = {
+ { .compatible = "allwinner,sun8i-r40-tcon-top" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table);
+
+static struct platform_driver sun8i_tcon_top_platform_driver = {
+ .probe = sun8i_tcon_top_probe,
+ .remove = sun8i_tcon_top_remove,
+ .driver = {
+ .name = "sun8i-tcon-top",
+ .of_match_table = sun8i_tcon_top_of_table,
+ },
+};
+module_platform_driver(sun8i_tcon_top_platform_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@xxxxxxxx>");
+MODULE_DESCRIPTION("Allwinner R40 TCON TOP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.h b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h
new file mode 100644
index 000000000000..19126e07d2a6
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@xxxxxxxx> */
+
+#ifndef _SUN8I_TCON_TOP_H_
+#define _SUN8I_TCON_TOP_H_
+
+#include <linux/device.h>
+
+struct sun8i_tcon_top;
+
+enum tcon_type {
+ tcon_type_lcd,
+ tcon_type_tv,
+};
+
+void sun8i_tcon_top_set_hdmi_src(struct sun8i_tcon_top *tcon_top, int tcon);
+void sun8i_tcon_top_de_config(struct sun8i_tcon_top *tcon_top,
+ int mixer, enum tcon_type tcon_type, int tcon);
+
+#endif /* _SUN8I_TCON_TOP_H_ */
diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h
new file mode 100644
index 000000000000..c05e92770402
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-tcon-top.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/* Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@xxxxxxxx> */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+
+#define CLK_BUS_TCON_TOP_DSI 0
+#define CLK_BUS_TCON_TOP_TV0 1
+#define CLK_BUS_TCON_TOP_TV1 2
+
+#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */
--
2.17.0