Re: [PATCH] arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS

From: Vivek Gautam
Date: Fri May 25 2018 - 08:52:14 EST


Hi Bjorn,

On Fri, May 25, 2018 at 4:01 AM, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
> The UFS host controller occationally (20%) fails to enable
> gcc_ufs_axi_clk because the UFS GDSC is not enabled. In most cases it's
> enabled through the UFS phy driver, but to make sure it's enabled let's
> enable it directly from the UFS host controller directly as well.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 380e14591686..03c7904bda14 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -674,6 +674,8 @@
> vccq-max-microamp = <450000>;
> vccq2-max-microamp = <450000>;
>
> + power-domains = <&gcc UFS_GDSC>;
> +

We shouldn't need power-domain with the phy. UFS_GDSC should
be attached to the controller, as the phy is powered up only after
the controller is power-up, and during collapse too, we turn off
the phy first.
Can you try testing keeping UFS_GDSC only with ufs controller and
remove it from the ufs-phy node? We are doing same on the 4.14 release
branch too for db820.
I apologize to have missed this in your patch for ufs-related dt nodes.
Can we please fix this now?

Best regards
Vivek

> clock-names =
> "core_clk_src",
> "core_clk",
> --
> 2.17.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation