Re: [PATCH 2/2] iio: 104-quad-8: Provide defines for magic numbers

From: Jonathan Cameron
Date: Sun May 27 2018 - 05:32:09 EST


On Thu, 24 May 2018 16:37:58 -0400
William Breathitt Gray <vilhelm.gray@xxxxxxxxx> wrote:

> This patch adds several register and bit defines to help improve the
> clarity of the code by cleaning up magic numbers throughout the driver
> source code.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
Hi William

I'd prefer a prefix to cut down on likely naming clashes between
these and things in headers in the future.

Jonathan
> ---
> drivers/iio/counter/104-quad-8.c | 86 ++++++++++++++++++++++----------
> 1 file changed, 60 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c
> index 4be85ec54af4..7d605d783051 100644
> --- a/drivers/iio/counter/104-quad-8.c
> +++ b/drivers/iio/counter/104-quad-8.c
> @@ -59,6 +59,39 @@ struct quad8_iio {
> unsigned int base;
> };
>
> +#define REG_CHANNEL_OPERATION 0x11
> +#define REG_INDEX_INPUT_LEVELS 0x16
> +/* Borrow Toggle flip-flop */
> +#define FLAG_BT BIT(0)
> +/* Carry Toggle flip-flop */
> +#define FLAG_CT BIT(1)
> +/* Error flag */
> +#define FLAG_E BIT(4)
> +/* Up/Down flag */
> +#define FLAG_UD BIT(5)
> +/* Reset and Load Signal Decoders */
> +#define CTR_RLD 0x00
> +/* Counter Mode Register */
> +#define CTR_CMR 0x20
> +/* Input / Output Control Register */
> +#define CTR_IOR 0x40
> +/* Index Control Register */
> +#define CTR_IDR 0x60
> +/* Reset Byte Pointer (three byte data pointer) */
> +#define RLD_RESET_BP 0x01
> +/* Reset Counter */
> +#define RLD_RESET_CNTR 0x02
> +/* Reset Borrow Toggle, Carry Toggle, Compare Toggle, and Sign flags */
> +#define RLD_RESET_FLAGS 0x04
> +/* Reset Error flag */
> +#define RLD_RESET_E 0x06
> +/* Preset Register to Counter */
> +#define RLD_PRESET_CNTR 0x08
> +/* Transfer Counter to Output Latch */
> +#define RLD_CNTR_OUT 0x10
> +#define CHAN_OP_ENABLE_COUNTERS 0x00
> +#define CHAN_OP_RESET_COUNTERS 0x01
> +
> static int quad8_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> {
> @@ -72,19 +105,20 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> if (chan->type == IIO_INDEX) {
> - *val = !!(inb(priv->base + 0x16) & BIT(chan->channel));
> + *val = !!(inb(priv->base + REG_INDEX_INPUT_LEVELS)
> + & BIT(chan->channel));
> return IIO_VAL_INT;
> }
>
> flags = inb(base_offset + 1);
> - borrow = flags & BIT(0);
> - carry = !!(flags & BIT(1));
> + borrow = flags & FLAG_BT;
> + carry = !!(flags & FLAG_CT);
>
> /* Borrow XOR Carry effectively doubles count range */
> *val = (borrow ^ carry) << 24;
>
> /* Reset Byte Pointer; transfer Counter to Output Latch */
> - outb(0x11, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_BP | RLD_CNTR_OUT, base_offset + 1);
>
> for (i = 0; i < 3; i++)
> *val |= (unsigned int)inb(base_offset) << (8 * i);
> @@ -120,17 +154,17 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
> return -EINVAL;
>
> /* Reset Byte Pointer */
> - outb(0x01, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_BP, base_offset + 1);
>
> /* Counter can only be set via Preset Register */
> for (i = 0; i < 3; i++)
> outb(val >> (8 * i), base_offset);
>
> /* Transfer Preset Register to Counter */
> - outb(0x08, base_offset + 1);
> + outb(CTR_RLD | RLD_PRESET_CNTR, base_offset + 1);
>
> /* Reset Byte Pointer */
> - outb(0x01, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_BP, base_offset + 1);
>
> /* Set Preset Register back to original value */
> val = priv->preset[chan->channel];
> @@ -138,9 +172,9 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
> outb(val >> (8 * i), base_offset);
>
> /* Reset Borrow, Carry, Compare, and Sign flags */
> - outb(0x04, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_FLAGS, base_offset + 1);
> /* Reset Error flag */
> - outb(0x06, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_E, base_offset + 1);
>
> return 0;
> case IIO_CHAN_INFO_ENABLE:
> @@ -153,7 +187,7 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
> ior_cfg = val | priv->preset_enable[chan->channel] << 1;
>
> /* Load I/O control configuration */
> - outb(0x40 | ior_cfg, base_offset + 1);
> + outb(CTR_IOR | ior_cfg, base_offset + 1);
>
> return 0;
> case IIO_CHAN_INFO_SCALE:
> @@ -217,7 +251,7 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
> priv->preset[chan->channel] = preset;
>
> /* Reset Byte Pointer */
> - outb(0x01, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_BP, base_offset + 1);
>
> /* Set Preset Register */
> for (i = 0; i < 3; i++)
> @@ -258,7 +292,7 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
> (unsigned int)preset_enable << 1;
>
> /* Load I/O control configuration to Input / Output Control Register */
> - outb(0x40 | ior_cfg, base_offset);
> + outb(CTR_IOR | ior_cfg, base_offset);
>
> return len;
> }
> @@ -274,7 +308,7 @@ static int quad8_get_noise_error(struct iio_dev *indio_dev,
> struct quad8_iio *const priv = iio_priv(indio_dev);
> const int base_offset = priv->base + 2 * chan->channel + 1;
>
> - return !!(inb(base_offset) & BIT(4));
> + return !!(inb(base_offset) & FLAG_E);
> }
>
> static const struct iio_enum quad8_noise_error_enum = {
> @@ -294,7 +328,7 @@ static int quad8_get_count_direction(struct iio_dev *indio_dev,
> struct quad8_iio *const priv = iio_priv(indio_dev);
> const int base_offset = priv->base + 2 * chan->channel + 1;
>
> - return !!(inb(base_offset) & BIT(5));
> + return !!(inb(base_offset) & FLAG_UD);
> }
>
> static const struct iio_enum quad8_count_direction_enum = {
> @@ -324,7 +358,7 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
> mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
>
> /* Load mode configuration to Counter Mode Register */
> - outb(0x20 | mode_cfg, base_offset);
> + outb(CTR_CMR | mode_cfg, base_offset);
>
> return 0;
> }
> @@ -364,7 +398,7 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
> priv->synchronous_mode[chan->channel] = synchronous_mode;
>
> /* Load Index Control configuration to Index Control Register */
> - outb(0x60 | idr_cfg, base_offset);
> + outb(CTR_IDR | idr_cfg, base_offset);
>
> return 0;
> }
> @@ -410,7 +444,7 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
> priv->quadrature_mode[chan->channel] = quadrature_mode;
>
> /* Load mode configuration to Counter Mode Register */
> - outb(0x20 | mode_cfg, base_offset);
> + outb(CTR_CMR | mode_cfg, base_offset);
>
> return 0;
> }
> @@ -446,7 +480,7 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
> priv->index_polarity[chan->channel] = index_polarity;
>
> /* Load Index Control configuration to Index Control Register */
> - outb(0x60 | idr_cfg, base_offset);
> + outb(CTR_IDR | idr_cfg, base_offset);
>
> return 0;
> }
> @@ -556,28 +590,28 @@ static int quad8_probe(struct device *dev, unsigned int id)
> priv->base = base[id];
>
> /* Reset all counters and disable interrupt function */
> - outb(0x01, base[id] + 0x11);
> + outb(CHAN_OP_RESET_COUNTERS, base[id] + REG_CHANNEL_OPERATION);
> /* Set initial configuration for all counters */
> for (i = 0; i < QUAD8_NUM_COUNTERS; i++) {
> base_offset = base[id] + 2 * i;
> /* Reset Byte Pointer */
> - outb(0x01, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_BP, base_offset + 1);
> /* Reset Preset Register */
> for (j = 0; j < 3; j++)
> outb(0x00, base_offset);
> /* Reset Borrow, Carry, Compare, and Sign flags */
> - outb(0x04, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_FLAGS, base_offset + 1);
> /* Reset Error flag */
> - outb(0x06, base_offset + 1);
> + outb(CTR_RLD | RLD_RESET_E, base_offset + 1);
> /* Binary encoding; Normal count; non-quadrature mode */
> - outb(0x20, base_offset + 1);
> + outb(CTR_CMR, base_offset + 1);
> /* Disable A and B inputs; preset on index; FLG1 as Carry */
> - outb(0x40, base_offset + 1);
> + outb(CTR_IOR, base_offset + 1);
> /* Disable index function; negative index polarity */
> - outb(0x60, base_offset + 1);
> + outb(CTR_IDR, base_offset + 1);
> }
> /* Enable all counters */
> - outb(0x00, base[id] + 0x11);
> + outb(CHAN_OP_ENABLE_COUNTERS, base[id] + REG_CHANNEL_OPERATION);
>
> return devm_iio_device_register(dev, indio_dev);
> }