[PATCH v2 4/6] clk: tegra20: init NDFLASH clock to sensible rate

From: Stefan Agner
Date: Sun May 27 2018 - 17:55:40 EST


From: Lucas Stach <dev@xxxxxxxxxx>

Set up the NAND Flash controller clock to run at 150MHz
instead of the rate set by the bootloader. This is a
conservative rate which also yields good performance.

Signed-off-by: Lucas Stach <dev@xxxxxxxxxx>
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
drivers/clk/tegra/clk-tegra20.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 0ee56dd04cec..dff8c425cd28 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1049,6 +1049,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
+ { TEGRA20_CLK_NDFLASH, TEGRA20_CLK_PLL_P, 150000000, 0 },
/* must be the last entry */
{ TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
};
--
2.17.0