[PATCH v4 8/8] Documentation/ABI: Add documentation mlxreg-io sysfs interfaces

[Vadim Pasternak]

Add documentation for mlxreg-io driver sysfs interfaces for user space
access to system's power resets control, reset causes monitoring,
programmable devices version reading and devices selection control.

Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
---
v4:
 Comments pointed out by Greg:
 Add Documentation/ABI/ entries for the new sysfs files.
---
 Documentation/ABI/stable/sysfs-driver-mlxreg-io | 51 +++++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/ABI/stable/sysfs-driver-mlxreg-io

diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
new file mode 100644
index 0000000..fcd659e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -0,0 +1,51 @@
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+							cause_aux_pwr_or_ref
+							cause_asic_thermal
+							cause_hotswap_or_wd
+							cause_fw_reset
+							cause_long_pb
+							cause_main_pwr_fail
+							cause_short_pb
+							cause_sw_reset
+Date:		May 2018
+KernelVersion:	4.18
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset cause, as following: power
+		auxiliary outage or power refresh, ASIC thermal shutdown,
+		hotswap or watchdog, firmware reset, long press power button,
+		short press power button, software reset. Value 1 in file means
+		this is reset cause, 0 - otherwise. Only one of the above
+		causes could be 1 at the same time, representing only last
+		reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+							cpld1_version
+							cpld2_version
+Date:		May 2018
+KernelVersion:	4.18
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on carrier and switch boards.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
+Date:		May 2018
+KernelVersion:	4.18
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows iio devices selection.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
+		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
+		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
+Date:		May 2018
+KernelVersion:	4.18
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files allow assert system's power cycling and PS units
+		on/off switching.
+
+		The files are write only.
-- 
2.1.4