Re: [PATCH v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity

From: Peter Ujfalusi
Date: Tue Jun 05 2018 - 09:00:08 EST


On 06/02/2018 06:27 PM, Janusz Krzysztofik wrote:
> Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm
> instead of omap-pcm") resulted in broken audio playback on OMAP1510
> (discovered on Amstrad Delta).

Good catch.

can you fix up the subject:
dmaengine: ti: omap-dma: Fix OMAP1510...


Otherwise:
Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

> When running on OMAP1510, omap-pcm used to obtain DMA offset from
> snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
> software calculations instead of snd_dmaengine_pcm_pointer() which
> depended on residue value calculated from omap_dma_get_src_pos().
> Similar code path is still available in now used
> sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.
>
> It was verified already before that omap_get_dma_src_pos() from
> arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
> commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
> callback") for details. Apparently the same applies to its successor,
> omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.
>
> On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
> as depreciated and discouraged for use in new drivers because of its
> unreliable accuracy. However, it seems the only working option for
> OPAM1510 now, as long as a software calculated residue is not
> implemented as OMAP1510 fallback in omap-dma.
>
> Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
> snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
> can be triggered in two ways:
> - by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
> sound/soc/omap/sdma-pcm.c,
> - by passing dma_caps.residue_granularity =
> DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.
>
> Let's do the latter.
>
> Created and tested against next-20180531 tag from linux-next tree.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
> ---
> Changelog:
> v2: apply the patch against omap-dma.c moved to drivers/dma/ti/
>
> drivers/dma/ti/omap-dma.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
> index b73fb51fbc81..96b5096c26dd 100644
> --- a/drivers/dma/ti/omap-dma.c
> +++ b/drivers/dma/ti/omap-dma.c
> @@ -1485,7 +1485,11 @@ static int omap_dma_probe(struct platform_device *pdev)
> od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
> od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> - od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> + if (__dma_omap15xx(od->plat->dma_attr))
> + od->ddev.residue_granularity =
> + DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
> + else
> + od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
> od->ddev.dev = &pdev->dev;
> INIT_LIST_HEAD(&od->ddev.channels);
>


--
PÃter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki