Re: [PATCH] ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0

[Martin Blumenstingl]

On Tue, Jun 5, 2018 at 10:52 AM, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
> Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the
> devices on the P212 Reference Design based boards.
>
> Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller")
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>

out of curiosity: I guess you tested this using u-boot?
if anyone else is interested: the only other way to test this is by
ensuring that the hdmi_5v regulator is turned off by Linux (by
removing it from the HDMI nodes) and then plugging in a USB device ->
if it doesn't get VBUS then the hdmi_5v regulator is the cause (and
needs to be kept/turned on by the USB code, just like Neil's patch
does)

> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> index 0cfd701..a1b3101 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -189,3 +189,10 @@
>  &usb0 {
>         status = "okay";
>  };
> +
> +&usb2_phy0 {
> +       /*
> +        * HDMI_5V is also used as supply for the USB VBUS.
> +        */
> +       phy-supply = <&hdmi_5v>;
> +};
> --
> 2.7.4
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-amlogic