[PATCH v3 6/6] ARM: dts: dra76x: Add MCAN node

From: Faiz Abbas
Date: Wed Jun 06 2018 - 02:08:18 EST


From: Franklin S Cooper Jr <fcooper@xxxxxx>

Add support for the MCAN peripheral which supports both classic
CAN messages along with the new CAN-FD message.

Add MCAN node to evm and enable it with a maximum datarate of 5 mbps

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
arch/arm/boot/dts/dra76-evm.dts | 6 ++++++
arch/arm/boot/dts/dra76x.dtsi | 13 +++++++++++++
2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..b6ac2b6ffc6e 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -404,3 +404,9 @@
phys = <&pcie1_phy>, <&pcie2_phy>;
phy-names = "pcie-phy0", "pcie-phy1";
};
+
+&m_can0 {
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 5157cc431574..613e4dc0ed3e 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -26,6 +26,19 @@
ti,syss-mask = <1>;
clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
clock-names = "fck";
+
+ m_can0: mcan@1a00 {
+ compatible = "bosch,m_can";
+ reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+ reg-names = "m_can", "message_ram";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&mcan_clk>, <&l3_iclk_div>;
+ clock-names = "cclk", "hclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+ };
};
};

--
2.17.0