Re: [PATCH v2] serial: imx: fix cached UCR2 read on software reset
From: Stefan Agner
Date: Tue Jun 12 2018 - 08:11:53 EST
On 07.06.2018 09:56, Uwe Kleine-KÃnig wrote:
> On Fri, Apr 20, 2018 at 02:44:07PM +0200, Stefan Agner wrote:
>> To reset the UART the SRST needs be cleared (low active). According
>> to the documentation the bit will remain active for 4 module clocks
>> until it is cleared (set to 1).
>> Hence the real register need to be read in case the cached register
>> indicates that the SRST bit is zero.
>> This bug lead to wrong baudrate because the baud rate register got
>> restored before reset completed in imx_flush_buffer.
>> Fixes: 3a0ab62f43de ("serial: imx: implement shadow registers for UCRx and UFCR")
>> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
>> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx>
>> Reviewed-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
> For the record, there is a customer of mine who reports that this commit
> breaks rs485 communication on i.MX25 because RTS stops to toggle as
> (Some details: uart3, fsl,uart-has-rtscts, fsl,dte-mode,
> linux,rs485-enabled-at-boot-time, native RTS.)
> I didn't debug this yet.
I have seen your patch today "serial: imx: fix comment about UCR2_SRST
and its handling for shadowing" so I assume you looked into this issue?
Was it related to that change?