Re: [PATCH 7/7] tty: serial: lantiq: Add CCF support

[Rob Herring]

On Tue, Jun 12, 2018 at 01:40:34PM +0800, Songjun Wu wrote:
> Previous implementation uses platform-dependent API to get the clock.
> Those functions are not available for other SoC which uses the same IP.
> The CCF (Common Clock Framework) have an abstraction based APIs
> for clock.
> Change to use CCF APIs to get clock and rate.
> So that different SoCs can use the same driver.
> Clocks and clock-names are updated in device tree binding.
> 
> Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
> 
> ---
> 
>  .../devicetree/bindings/serial/lantiq_asc.txt      |  15 +++

Please split bindings to separate patch.

>  drivers/tty/serial/Kconfig                         |   2 +-
>  drivers/tty/serial/lantiq.c                        | 101 +++++++++++++++++----
>  3 files changed, 98 insertions(+), 20 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
> index 3acbd309ab9d..608f0c87a4af 100644
> --- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
> +++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
> @@ -6,6 +6,10 @@ Required properties:
>  - interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
>    depends on the interrupt-parent interrupt controller.
>  
> +Optional properties:
> +- clocks: Should contain frequency clock and gate clock
> +- clock-names: Should be "freq" and "asc"
> +
>  Example:
>  
>  asc1: serial@e100c00 {
> @@ -14,3 +18,14 @@ asc1: serial@e100c00 {
>  	interrupt-parent = <&icu0>;
>  	interrupts = <112 113 114>;
>  };
> +
> +asc0: serial@600000 {
> +	compatible = "lantiq,asc";
> +	reg = <0x600000 0x100000>;

1MB of address space? That wastes a lot of virtual space on 32-bit 
systems. Just make the size the actual used range.

> +	interrupt-parent = <&gic>;
> +	interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
> +	<GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
> +	<GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&pll0aclk SSX4_CLK>, <&clkgate1 GATE_URT_CLK>;
> +	clock-names = "freq", "asc";
> +};