[PATCH 1/3] ath10k: sdio: use same endpoint id for all packets in a bundle

From: Niklas Cassel
Date: Wed Jun 20 2018 - 05:03:03 EST


All packets in a bundle should use the same endpoint id as the
first lookahead.

This matches how things are done is ath6kl, however,
this patch can theoretically handle several bundles
in ath10k_sdio_mbox_rx_process_packets().

Without this patch we get lots of errors about invalid endpoint id:

ath10k_sdio mmc2:0001:1: invalid endpoint in look-ahead: 224
ath10k_sdio mmc2:0001:1: failed to get pending recv messages: -12
ath10k_sdio mmc2:0001:1: failed to process pending SDIO interrupts: -12

Signed-off-by: Alagu Sankar <alagusankar@xxxxxxxxxxxxxxx>
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/sdio.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index d612ce8c9cff..d46523b0472c 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -434,12 +434,14 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
enum ath10k_htc_ep_id id;
int ret, i, *n_lookahead_local;
u32 *lookaheads_local;
+ int lookahead_idx = 0;

for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
lookaheads_local = lookaheads;
n_lookahead_local = n_lookahead;

- id = ((struct ath10k_htc_hdr *)&lookaheads[i])->eid;
+ id = ((struct ath10k_htc_hdr *)
+ &lookaheads[lookahead_idx++])->eid;

if (id >= ATH10K_HTC_EP_COUNT) {
ath10k_warn(ar, "invalid endpoint in look-ahead: %d\n",
@@ -462,6 +464,7 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
/* Only read lookahead's from RX trailers
* for the last packet in a bundle.
*/
+ lookahead_idx--;
lookaheads_local = NULL;
n_lookahead_local = NULL;
}
--
2.17.1