Re: KVM guest sometimes failed to boot because of kernel stack overflow if KPTI is enabled on a hisilicon ARM64 platform.

[Wei Xu]

Hi Will,

On 2018/6/20 22:42, Will Deacon wrote:
> Hi Wei,
>
> On Wed, Jun 20, 2018 at 10:18:00PM +0800, Wei Xu wrote:
> > We have observed KVM guest sometimes failed to boot because of kernel stack
> > overflow if KPTI is enabled on a hisilicon arm64 platform.
> >
> > We also tested with different kernel version and found it is only
> > happened if the KPTI and KVM(enable-kvm & cpu=host) are enabled on the
> > guest.
> > The detail result is as below table.
> >
> > +---------+----------+--------+------------+-------------------+
> >       |  host   |host KPTI | guest  | guest KPTI | kvm guest         |
> >       |  kernel |enabled   | kernel | enabled    | booting result    |
> > +---------+----------+--------+------------+-------------------+
> >       |  4.17   |     Y    |  4.17  |     Y      |  stack overflow   |
> > +---------+----------+--------+------------+-------------------+
> >       |  4.17   |     Y    |  4.16  |     NA     | OK          |
> > +---------+----------+--------+------------+-------------------+
> >       |  4.16   |     NA   |  4.17  |     Y      |  stack overflow   |
> > +---------+----------+--------+------------+-------------------+
> >       |  4.16   |     NA   |  4.16  |     NA     | OK          |
> > +---------+----------+--------+------------+-------------------+
> >
> > A simple walk-around is adding this platform into the "kpti_safe_list".
> > But it does not resolve the issue indeed.
> > Could you please share any hint how to resolve this kind issue?
> > Thanks!
> >
> > Another issue we found is "kpti_install_ng_mappings" will be invoked
> > even "kpti=off" has been added in the kernel command line. Is that expected?
> > This is because "kpti" is not a *early* param that "init_cpu_features" will
> > be invoked before parsing the param.
> That sounds like a straightforward bug, which means we should use
> early_param instead of __setup. I assume that doesn't fix your crash,
> though?

Thanks for you quick response!
It can fix our crash but just another walk-around.

> > The command we are using to run the guest is as:
> >
> >      ./qemu-system-aarch64 -machine virt,kernel_irqchip=on,gic-version=3 -cpu
> > host
> >      -enable-kvm -smp 1 -m 1024 -kernel ./Image -initrd
> > ../mini-rootfs-arm64.cpio.gz
> >      -nographic -append "rdinit=init console=ttyAMA0
> > earlycon=pl011,0x9000000"
> >
> > The log is as below:
> >
> >          [    0.000000] Booting Linux on physical CPU 0x0000000000
> > [0x480fd010]
> >          [    0.000000] Linux version 4.17.0-45864-g29dcea8-dirty
> > (joyx@Turing-Arch-b) (gcc version 4.9.1 20140505 (prerelease) (crosstool-NG
> > linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05)) #6 SMP PREEMPT Fri Jun
> > 15 21:39:52 CST 2018
> ^^^ This is reproducible with vanilla v4.17 and defconfig, right?

Yes.

> >          [    0.038859] SMP: Total of 1 processors activated.
> >          [    0.039338] CPU features: detected: GIC system register CPU
> > interface
> >          [    0.039988] CPU features: detected: Privileged Access Never
> >          [    0.040560] CPU features: detected: User Access Override
> >          [    0.041093] CPU features: detected: RAS Extension Support
> >          [    0.042947] Insufficient stack space to handle exception!
> >          [    0.042949] ESR: 0x96000046 -- DABT (current EL)
> >          [    0.043963] FAR: 0xffff0000093a80e0
> >          [    0.045794] Task stack: [0xffff0000093a8000..0xffff0000093ac000]
> >          [    0.052181] IRQ stack: [0xffff000008000000..0xffff000008004000]
> >          [    0.058572] Overflow stack:
> > [0xffff80003efce2f0..0xffff80003efcf2f0]
> >          [    0.065068] CPU: 0 PID: 12 Comm: migration/0 Not tainted
> > 4.17.0-45864-g29dcea8-dirty #6
> >          [    0.073138] Hardware name: linux,dummy-virt (DT)
> >          [    0.077831] pstate: 604003c5 (nZCv DAIF +PAN -UAO)
> >          [    0.082661] pc : el1_sync+0x0/0xb0
> >          [    0.086152] lr : kpti_install_ng_mappings+0x120/0x214
> Can you use scripts/faddr2line to find out which line of code the lr is
> pointing at, please? It would be interesting to know if we managed to
> install the idmap.
I did not use addr2line before but with gdb we can get same info as below:

(gdb) list *kpti_install_ng_mappings+0x120/0x214
0xffff000008091d70 is in kpti_install_ng_mappings 
(/home/joyx/plinth-kernel-v200/arch/arm64/kernel/cpufeature.c:907).
902             return !has_cpuid_feature(entry, scope);
903     }
904
905     static void
906     kpti_install_ng_mappings(const struct arm64_cpu_capabilities 
*__unused)
907     {
908             typedef void (kpti_remap_fn)(int, int, phys_addr_t);
909             extern kpti_remap_fn idmap_kpti_install_ng_mappings;
910             kpti_remap_fn *remap_fn;
911

> Hmm, I wonder if this is at all related to RAS, since we've just enabled
> that and if we take a fault whilst rewriting swapper then we're going to
> get stuck. What happens if you set CONFIG_ARM64_RAS_EXTN=n in the guest?

I will try it now.
Thanks!

Best Regards,
Wei

> Will
>
> .