Re: [PATCH v2 1/2] dt-bindings: phy: Add binding doc for Stingray PCIe PHY

From: Kishon Vijay Abraham I
Date: Fri Jun 29 2018 - 02:37:16 EST


+Rob and device tree list

On Thursday 21 June 2018 05:48 AM, Ray Jui wrote:
> Add binding document for Stingray PCIe PHYs for both PAXB and PAXC based
> root complex
>
> Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/phy/brcm,sr-pcie-phy.txt | 39 ++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
> new file mode 100644
> index 0000000..c2eede6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
> @@ -0,0 +1,39 @@
> +Broadcom Stingray PCIe PHY
> +
> +Required properties:
> +- compatible: must be "brcm,sr-pcie-phy"
> +- brcm,sr-cdru: phandle to the CDRU syscon node
> +- brcm,sr-mhb: phandle to the MHB syscon node
> +- #phy-cells: Must be 1, denotes the PHY index
> +
> +For PAXB based root complex, one can have a configuration of up to 8 PHYs
> +PHY index goes from 0 to 7
> +
> +For the internal PAXC based root complex, PHY index is always 8
> +
> +Example:
> + mhb: syscon@60401000 {
> + compatible = "brcm,sr-mhb", "syscon";
> + reg = <0 0x60401000 0 0x38c>;
> + };
> +
> + cdru: syscon@6641d000 {
> + compatible = "brcm,sr-cdru", "syscon";
> + reg = <0 0x6641d000 0 0x400>;
> + };
> +
> + pcie_phy: phy {
> + compatible = "brcm,sr-pcie-phy";
> + brcm,sr-cdru = <&cdru>;
> + brcm,sr-mhb = <&mhb>;
> + #phy-cells = <1>;
> + };
> +
> + /* users of the PCIe PHY */
> +
> + pcie0: pcie@48000000 {
> + ...
> + ...
> + phys = <&pcie_phy 0>;
> + phy-names = "pcie-phy";
> + };
>