[PATCH for 4.18 2/6] rseq: use get_user/put_user rather than __get_user/__put_user

[Mathieu Desnoyers]

__get_user()/__put_user() is used to read values for address ranges that
were already checked with access_ok() on rseq registration.

It has been recognized that __get_user/__put_user are optimizing the
wrong thing. Replace them by get_user/put_user across rseq instead.

If those end up showing up in benchmarks, the proper approach would be to
use user_access_begin() / unsafe_{get,put}_user() / user_access_end()
anyway.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
CC: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Joel Fernandes <joelaf@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Dave Watson <davejwatson@xxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: Andi Kleen <andi@xxxxxxxxxxxxxx>
Cc: "H . Peter Anvin" <hpa@xxxxxxxxx>
Cc: Chris Lameter <cl@xxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Michael Kerrisk <mtk.manpages@xxxxxxxxx>
Cc: "Paul E . McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
Cc: Paul Turner <pjt@xxxxxxxxxx>
Cc: Boqun Feng <boqun.feng@xxxxxxxxx>
Cc: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
Cc: Ben Maurer <bmaurer@xxxxxx>
Cc: linux-api@xxxxxxxxxxxxxxx
CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
---
 kernel/rseq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/rseq.c b/kernel/rseq.c
index 16b38c5342f9..2c8463acb50d 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -85,9 +85,9 @@ static int rseq_update_cpu_id(struct task_struct *t)
 {
 	u32 cpu_id = raw_smp_processor_id();
 
-	if (__put_user(cpu_id, &t->rseq->cpu_id_start))
+	if (put_user(cpu_id, &t->rseq->cpu_id_start))
 		return -EFAULT;
-	if (__put_user(cpu_id, &t->rseq->cpu_id))
+	if (put_user(cpu_id, &t->rseq->cpu_id))
 		return -EFAULT;
 	trace_rseq_update(t);
 	return 0;
@@ -100,14 +100,14 @@ static int rseq_reset_rseq_cpu_id(struct task_struct *t)
 	/*
 	 * Reset cpu_id_start to its initial state (0).
 	 */
-	if (__put_user(cpu_id_start, &t->rseq->cpu_id_start))
+	if (put_user(cpu_id_start, &t->rseq->cpu_id_start))
 		return -EFAULT;
 	/*
 	 * Reset cpu_id to RSEQ_CPU_ID_UNINITIALIZED, so any user coming
 	 * in after unregistration can figure out that rseq needs to be
 	 * registered again.
 	 */
-	if (__put_user(cpu_id, &t->rseq->cpu_id))
+	if (put_user(cpu_id, &t->rseq->cpu_id))
 		return -EFAULT;
 	return 0;
 }
@@ -120,7 +120,7 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs)
 	u32 sig;
 	int ret;
 
-	ret = __get_user(ptr, &t->rseq->rseq_cs);
+	ret = get_user(ptr, &t->rseq->rseq_cs);
 	if (ret)
 		return ret;
 	if (!ptr) {
@@ -163,7 +163,7 @@ static int rseq_need_restart(struct task_struct *t, u32 cs_flags)
 	int ret;
 
 	/* Get thread flags. */
-	ret = __get_user(flags, &t->rseq->flags);
+	ret = get_user(flags, &t->rseq->flags);
 	if (ret)
 		return ret;
 
@@ -203,7 +203,7 @@ static int clear_rseq_cs(struct task_struct *t)
 	 *
 	 * Set rseq_cs to NULL with single-copy atomicity.
 	 */
-	return __put_user(0UL, &t->rseq->rseq_cs);
+	return put_user(0UL, &t->rseq->rseq_cs);
 }
 
 /*
-- 
2.11.0