Re: [PATCH v5 6/6] crypto: qcom: Add ACPI support

[Jeffrey Hugo]

On 7/9/2018 12:19 AM, Vinod Koul wrote:
> From: Timur Tabi <timur@xxxxxxxxxxxxxx>
>
> Add support for probing on ACPI systems, with ACPI HID QCOM8160.
>
> On ACPI systems, clocks are always enabled, the PRNG should
> already be enabled, and the register region is read-only.
> The driver only verifies that the hardware is already
> enabled never tries to disable or configure it.
>
> Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxxx>
> [port to crypto API]
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>

Tested-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>

> ---
>   drivers/crypto/qcom-rng.c | 22 ++++++++++++++++++----
>   1 file changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
> index f1bd86acaf9d..8118d4cd93b2 100644
> --- a/drivers/crypto/qcom-rng.c
> +++ b/drivers/crypto/qcom-rng.c
> @@ -4,6 +4,7 @@
>   // Based on msm-rng.c and downstream driver
>   
>   #include <crypto/internal/rng.h>
> +#include <linux/acpi.h>
>   #include <linux/clk.h>
>   #include <linux/crypto.h>
>   #include <linux/module.h>
> @@ -168,13 +169,17 @@ static int qcom_rng_probe(struct platform_device *pdev)
>   	if (IS_ERR(rng->base))
>   		return PTR_ERR(rng->base);
>   
> -	rng->clk = devm_clk_get(&pdev->dev, "core");
> -	if (IS_ERR(rng->clk))
> -		return PTR_ERR(rng->clk);
>   
> -	rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
> +	/* ACPI systems have clk already on, so skip clk_get */
> +	if (!has_acpi_companion(&pdev->dev)) {
> +		rng->clk = devm_clk_get(&pdev->dev, "core");
> +		if (IS_ERR(rng->clk))
> +			return PTR_ERR(rng->clk);
> +	}
>   
> +	rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev);
>   	qcom_rng_dev = rng;
> +
>   	ret = crypto_register_rng(&qcom_rng_alg);
>   	if (ret) {
>   		dev_err(&pdev->dev, "Register crypto rng failed: %d\n", ret);
> @@ -193,6 +198,14 @@ static int qcom_rng_remove(struct platform_device *pdev)
>   	return 0;
>   }
>   
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id qcom_rng_acpi_match[] = {
> +	{ .id = "QCOM8160", .driver_data = 1 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
> +#endif
> +
>   static const struct of_device_id qcom_rng_of_match[] = {
>   	{ .compatible = "qcom,prng", .data = (void *)0},
>   	{ .compatible = "qcom,prng-ee", .data = (void *)1},
> @@ -206,6 +219,7 @@ static struct platform_driver qcom_rng_driver = {
>   	.driver = {
>   		.name = KBUILD_MODNAME,
>   		.of_match_table = of_match_ptr(qcom_rng_of_match),
> +		.acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
>   	}
>   };
>   module_platform_driver(qcom_rng_driver);


--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.