[PATCH 3/4] ARM: at91: pm: add PMC fast startup registers defines

From: Claudiu Beznea
Date: Tue Jul 17 2018 - 04:27:24 EST


Add PMC fast startup registers defines.

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
include/linux/clk/at91_pmc.h | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 4ea2cbf9b50d..931ab05f771d 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -157,6 +157,19 @@
#define AT91_PMC_GCKRDY (1 << 24) /* Generated Clocks */
#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */

+#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */
+#define AT91_PMC_FSTT(n) BIT(n)
+#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */
+#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */
+#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */
+#define AT91_PMC_LPM BIT(20) /* Low-power Mode */
+#define AT91_PMC_RXLP_MCE BIT(24) /* Backup UART Receive Enable */
+#define AT91_PMC_ACC_CE BIT(25) /* ACC Enable */
+
+#define AT91_PMC_FSPR 0x74 /* Fast Startup Polarity Reg */
+
+#define AT91_PMC_FS_INPUT_MASK 0x7ff
+
#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */

#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
--
2.7.4