Re: [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes

[Matthias Kaehlcke]

On Thu, Jul 12, 2018 at 02:09:08PM +0530, Amit Kucheria wrote:
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..01ff146 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
>  			#interrupt-cells = <2>;
>  		};
>  
> +		tsens0: thermal-sensor@c263000 {
> +			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +			reg = <0xc263000 0x1ff>, /* TM */
> +			      <0xc222000 0x1ff>; /* SROT */
> +			#qcom,sensors = <13>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		tsens1: thermal-sensor@c265000 {
> +			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +			reg = <0xc265000 0x1ff>, /* TM */
> +			      <0xc223000 0x1ff>; /* SROT */
> +			#qcom,sensors = <8>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		spmi_bus: spmi@c440000 {
>  			compatible = "qcom,spmi-pmic-arb";
>  			reg = <0xc440000 0x1100>,

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>