Re: [PATCH V3 2/2] mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux â

[Peter Rosin]

On 2018-07-19 15:43, Mircea Caprioru wrote:
> This patch adds basic support for Analog Device ADGS1408/09 SPI mux
> controller.
> 
> The device is probed and set to a disabled state. It uses the new mux
> controller framework.
> 
> Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
> ---
> Changelog V2 -> V3
> - removed Kconfig line
> - changed to GPL-2.0-or-later
> - fixed typo in ADGS1408
> - moved spi #include after linux/property.h
> - added trailing comma
> - reverted back to .of_match_table
> - removed duplicated logic inside switch statement
> 
>  drivers/mux/Kconfig    |  10 ++++
>  drivers/mux/Makefile   |   2 +
>  drivers/mux/adgs1408.c | 128 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 140 insertions(+)
>  create mode 100644 drivers/mux/adgs1408.c
> 
> diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
> index 6241678e99af..7659d6c5f718 100644
> --- a/drivers/mux/Kconfig
> +++ b/drivers/mux/Kconfig
> @@ -21,6 +21,16 @@ config MUX_ADG792A
>  	  To compile the driver as a module, choose M here: the module will
>  	  be called mux-adg792a.
>  
> +config MUX_ADGS1408
> +	tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers"
> +	depends on SPI
> +	help
> +	  ADGS1408 8:1 multiplexer and ADGS1409 double 4:1 multiplexer
> +	  switches.
> +
> +	  To compile the driver as a module, choose M here: the module will
> +	  be called mux-adgs1408.
> +
>  config MUX_GPIO
>  	tristate "GPIO-controlled Multiplexer"
>  	depends on GPIOLIB || COMPILE_TEST
> diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
> index c3d883955fd5..6e9fa47daf56 100644
> --- a/drivers/mux/Makefile
> +++ b/drivers/mux/Makefile
> @@ -5,10 +5,12 @@
>  
>  mux-core-objs			:= core.o
>  mux-adg792a-objs		:= adg792a.o
> +mux-adgs1408-objs		:= adgs1408.o
>  mux-gpio-objs			:= gpio.o
>  mux-mmio-objs			:= mmio.o
>  
>  obj-$(CONFIG_MULTIPLEXER)	+= mux-core.o
>  obj-$(CONFIG_MUX_ADG792A)	+= mux-adg792a.o
> +obj-$(CONFIG_MUX_ADGS1408)	+= mux-adgs1408.o
>  obj-$(CONFIG_MUX_GPIO)		+= mux-gpio.o
>  obj-$(CONFIG_MUX_MMIO)		+= mux-mmio.o
> diff --git a/drivers/mux/adgs1408.c b/drivers/mux/adgs1408.c
> new file mode 100644
> index 000000000000..2722fb466e38
> --- /dev/null
> +++ b/drivers/mux/adgs1408.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ADGS1408/ADGS1409 SPI MUX driver
> + *
> + * Copyright 2018 Analog Devices Inc.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mux/driver.h>
> +#include <linux/of_platform.h>
> +#include <linux/property.h>
> +#include <linux/spi/spi.h>
> +
> +#define ADGS1408_SW_DATA       (0x01)
> +#define ADGS1408_REG_READ(reg) ((reg) | 0x80)
> +#define ADGS1408_DISABLE       (0x00)
> +#define ADGS1408_MUX(state)    (((state) << 1) | 1)
> +
> +enum {
> +	ADGS1408,
> +	ADGS1409,
> +};
> +
> +static int adgs1408_spi_reg_write(struct spi_device *spi,
> +				  u8 reg_addr, u8 reg_data)
> +{
> +	u8 tx_buf[2];
> +
> +	tx_buf[0] = reg_addr;
> +	tx_buf[1] = reg_data;
> +
> +	return spi_write_then_read(spi, tx_buf, sizeof(tx_buf), NULL, 0);
> +}
> +
> +static int adgs1408_set(struct mux_control *mux, int state)
> +{
> +	struct spi_device *spi = to_spi_device(mux->chip->dev.parent);
> +	u8 reg;
> +
> +	if (state == MUX_IDLE_DISCONNECT)
> +		reg = ADGS1408_DISABLE;
> +	else
> +		reg = ADGS1408_MUX(state);
> +
> +	return adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, reg);
> +}
> +
> +static const struct mux_control_ops adgs1408_ops = {
> +	.set = adgs1408_set,
> +};
> +
> +static int adgs1408_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +	struct device *dev = &spi->dev;
> +	struct mux_chip *mux_chip;
> +	struct mux_control *mux;
> +	int ret, idle_state;
> +
> +	mux_chip = devm_mux_chip_alloc(dev, 1, 0);
> +	if (IS_ERR(mux_chip))
> +		return PTR_ERR(mux_chip);
> +
> +	mux_chip->ops = &adgs1408_ops;
> +
> +	ret = adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, ADGS1408_DISABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = device_property_read_u32_array(dev, "idle-state",
> +					     &idle_state,
> +					     mux_chip->controllers);
> +	if (ret < 0)
> +		idle_state = MUX_IDLE_AS_IS;
> +
> +	mux = mux_chip->mux;
> +
> +	if (id->driver_data == ADGS1408)
> +		mux->states = 8;
> +	else
> +		mux->states = 4;
> +
> +	switch (idle_state) {
> +	case MUX_IDLE_DISCONNECT:
> +	case MUX_IDLE_AS_IS:
> +	case 0 ... 7:
> +		/* adgs1409 supports only 4 states */
> +		if (idle_state < mux->states) {
> +			mux->idle_state = idle_state;
> +			break;
> +		}
> +		/* fall through */
> +	default:
> +		dev_err(dev, "invalid idle-state %d\n", idle_state);
> +		return -EINVAL;
> +	}
> +
> +	return devm_mux_chip_register(dev, mux_chip);
> +}
> +
> +static const struct spi_device_id adgs1408_id[] = {
> +	{ "adgs1408", ADGS1408 },
> +	{ "adgs1409", ADGS1409 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, adgs1408_id);
> +
> +static const struct of_device_id adgs1408_of_match[] = {
> +	{ .compatible = "adi,adgs1408", },

I think you need to keep track of which compatible is in use. This
is normally done with

	{ .compatible = "adi,adgs1408", .data = (void *)ADGS1408, },

etc. And in .probe you'd have code like

	chip = (enum chip_type)of_device_get_match_data(dev);
	if (!chip)
		chip = spi_get_device_id(spi)->driver_data;

And for that to work, you of course also need to name the enumeration and
start it at 1, so that 0 is kept illegal.

Cheers,
Peter

> +	{ .compatible = "adi,adgs1409", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, adgs1408_of_match);
> +
> +static struct spi_driver adgs1408_driver = {
> +	.driver = {
> +		.name = "adgs1408",
> +		.of_match_table = of_match_ptr(adgs1408_of_match),
> +	},
> +	.probe = adgs1408_probe,
> +	.id_table = adgs1408_id,
> +};
> +module_spi_driver(adgs1408_driver);
> +
> +MODULE_AUTHOR("Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices ADGS1408 MUX driver");
> +MODULE_LICENSE("GPL v2");
>