[PATCH 4.14 17/92] hv_netvsc: split sub-channel setup into async and sync

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>

[ Upstream commit 3ffe64f1a641b80a82d9ef4efa7a05ce69049871 ]

When doing device hotplug the sub channel must be async to avoid
deadlock issues because device is discovered in softirq context.

When doing changes to MTU and number of channels, the setup
must be synchronous to avoid races such as when MTU and device
settings are done in a single ip command.

Reported-by: Thomas Walker <Thomas.Walker@xxxxxxxxxxxx>
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation")
Signed-off-by: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
Signed-off-by: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/hyperv/hyperv_net.h   |    2 -
 drivers/net/hyperv/netvsc.c       |   37 ++++++++++++++++++++++-
 drivers/net/hyperv/netvsc_drv.c   |   17 +++++++++-
 drivers/net/hyperv/rndis_filter.c |   61 +++++++-------------------------------
 4 files changed, 65 insertions(+), 52 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -207,7 +207,7 @@ int netvsc_recv_callback(struct net_devi
 void netvsc_channel_cb(void *context);
 int netvsc_poll(struct napi_struct *napi, int budget);
 
-void rndis_set_subchannel(struct work_struct *w);
+int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev);
 int rndis_filter_open(struct netvsc_device *nvdev);
 int rndis_filter_close(struct netvsc_device *nvdev);
 struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -62,6 +62,41 @@ void netvsc_switch_datapath(struct net_d
 			       VM_PKT_DATA_INBAND, 0);
 }
 
+/* Worker to setup sub channels on initial setup
+ * Initial hotplug event occurs in softirq context
+ * and can't wait for channels.
+ */
+static void netvsc_subchan_work(struct work_struct *w)
+{
+	struct netvsc_device *nvdev =
+		container_of(w, struct netvsc_device, subchan_work);
+	struct rndis_device *rdev;
+	int i, ret;
+
+	/* Avoid deadlock with device removal already under RTNL */
+	if (!rtnl_trylock()) {
+		schedule_work(w);
+		return;
+	}
+
+	rdev = nvdev->extension;
+	if (rdev) {
+		ret = rndis_set_subchannel(rdev->ndev, nvdev);
+		if (ret == 0) {
+			netif_device_attach(rdev->ndev);
+		} else {
+			/* fallback to only primary channel */
+			for (i = 1; i < nvdev->num_chn; i++)
+				netif_napi_del(&nvdev->chan_table[i].napi);
+
+			nvdev->max_chn = 1;
+			nvdev->num_chn = 1;
+		}
+	}
+
+	rtnl_unlock();
+}
+
 static struct netvsc_device *alloc_net_device(void)
 {
 	struct netvsc_device *net_device;
@@ -78,7 +113,7 @@ static struct netvsc_device *alloc_net_d
 
 	init_completion(&net_device->channel_init_wait);
 	init_waitqueue_head(&net_device->subchan_open);
-	INIT_WORK(&net_device->subchan_work, rndis_set_subchannel);
+	INIT_WORK(&net_device->subchan_work, netvsc_subchan_work);
 
 	return net_device;
 }
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -911,8 +911,20 @@ static int netvsc_attach(struct net_devi
 	if (IS_ERR(nvdev))
 		return PTR_ERR(nvdev);
 
-	/* Note: enable and attach happen when sub-channels setup */
+	if (nvdev->num_chn > 1) {
+		ret = rndis_set_subchannel(ndev, nvdev);
+
+		/* if unavailable, just proceed with one queue */
+		if (ret) {
+			nvdev->max_chn = 1;
+			nvdev->num_chn = 1;
+		}
+	}
 
+	/* In any case device is now ready */
+	netif_device_attach(ndev);
+
+	/* Note: enable and attach happen when sub-channels setup */
 	netif_carrier_off(ndev);
 
 	if (netif_running(ndev)) {
@@ -2035,6 +2047,9 @@ static int netvsc_probe(struct hv_device
 
 	memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
 
+	if (nvdev->num_chn > 1)
+		schedule_work(&nvdev->subchan_work);
+
 	/* hw_features computed in rndis_netdev_set_hwcaps() */
 	net->features = net->hw_features |
 		NETIF_F_HIGHDMA | NETIF_F_SG |
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1055,29 +1055,15 @@ static void netvsc_sc_open(struct vmbus_
  * This breaks overlap of processing the host message for the
  * new primary channel with the initialization of sub-channels.
  */
-void rndis_set_subchannel(struct work_struct *w)
+int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev)
 {
-	struct netvsc_device *nvdev
-		= container_of(w, struct netvsc_device, subchan_work);
 	struct nvsp_message *init_packet = &nvdev->channel_init_pkt;
-	struct net_device_context *ndev_ctx;
-	struct rndis_device *rdev;
-	struct net_device *ndev;
-	struct hv_device *hv_dev;
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
+	struct hv_device *hv_dev = ndev_ctx->device_ctx;
+	struct rndis_device *rdev = nvdev->extension;
 	int i, ret;
 
-	if (!rtnl_trylock()) {
-		schedule_work(w);
-		return;
-	}
-
-	rdev = nvdev->extension;
-	if (!rdev)
-		goto unlock;	/* device was removed */
-
-	ndev = rdev->ndev;
-	ndev_ctx = netdev_priv(ndev);
-	hv_dev = ndev_ctx->device_ctx;
+	ASSERT_RTNL();
 
 	memset(init_packet, 0, sizeof(struct nvsp_message));
 	init_packet->hdr.msg_type = NVSP_MSG5_TYPE_SUBCHANNEL;
@@ -1091,13 +1077,13 @@ void rndis_set_subchannel(struct work_st
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 	if (ret) {
 		netdev_err(ndev, "sub channel allocate send failed: %d\n", ret);
-		goto failed;
+		return ret;
 	}
 
 	wait_for_completion(&nvdev->channel_init_wait);
 	if (init_packet->msg.v5_msg.subchn_comp.status != NVSP_STAT_SUCCESS) {
 		netdev_err(ndev, "sub channel request failed\n");
-		goto failed;
+		return -EIO;
 	}
 
 	nvdev->num_chn = 1 +
@@ -1116,21 +1102,7 @@ void rndis_set_subchannel(struct work_st
 	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
 		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
 
-	netif_device_attach(ndev);
-	rtnl_unlock();
-	return;
-
-failed:
-	/* fallback to only primary channel */
-	for (i = 1; i < nvdev->num_chn; i++)
-		netif_napi_del(&nvdev->chan_table[i].napi);
-
-	nvdev->max_chn = 1;
-	nvdev->num_chn = 1;
-
-	netif_device_attach(ndev);
-unlock:
-	rtnl_unlock();
+	return 0;
 }
 
 static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device,
@@ -1321,21 +1293,12 @@ struct netvsc_device *rndis_filter_devic
 		netif_napi_add(net, &net_device->chan_table[i].napi,
 			       netvsc_poll, NAPI_POLL_WEIGHT);
 
-	if (net_device->num_chn > 1)
-		schedule_work(&net_device->subchan_work);
+	return net_device;
 
 out:
-	/* if unavailable, just proceed with one queue */
-	if (ret) {
-		net_device->max_chn = 1;
-		net_device->num_chn = 1;
-	}
-
-	/* No sub channels, device is ready */
-	if (net_device->num_chn == 1)
-		netif_device_attach(net);
-
-	return net_device;
+	/* setting up multiple channels failed */
+	net_device->max_chn = 1;
+	net_device->num_chn = 1;
 
 err_dev_remv:
 	rndis_filter_device_remove(dev, net_device);