Re: [PATCH 10/32] ARM: dts: omap3-gta04: update gpmc NAND setup

From: H. Nikolaus Schaller
Date: Wed Jul 25 2018 - 04:16:39 EST


Hi,

> Am 25.07.2018 um 10:10 schrieb Ladislav Michl <ladis@xxxxxxxxxxxxxx>:
>
> On Wed, Jul 25, 2018 at 08:58:42AM +0200, H. Nikolaus Schaller wrote:
>> to better match omap3-beagle.dts (which was the basis
>> of designing the GTA04).
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/omap3-gta04.dtsi | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
>> index 03fe404cbf56..9568e0c4d4bf 100644
>> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
>> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
>> @@ -616,27 +616,27 @@
>> interrupt-parent = <&gpmc>;
>> interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
>> <1 IRQ_TYPE_NONE>; /* termcount */
>> + ti,nand-ecc-opt = "ham1";
>> + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
>> nand-bus-width = <16>;
>> - ti,nand-ecc-opt = "bch8";
>
> You are using weeker ECC scheme just to be compatible with another machine?

No not another machine. The GTA04 uses the same SoC and NAND chip as the BeagleBoard,
so you can imagine GTA04 being a BeagleBoard + a lot of other things.

The key reason is to change the ecc scheme is to be compatible with the U-Boot used.

BootROM can only handle ham1 for the MLO. And there is no nand-ecc-opt
for each partition. So we either can't mix ECC schemes if we want to be able
to read/write MLO as the first partition from kernel.

> So now you cannot boot already deployed filesystem...

No. We always used ham1 and bch8 wasn't working at all here. Therefore nobody
did use upstream kernel for NAND yet...

> Also is it enough for
> NAND chip used?

Well, the chip is recommended to use bch8 but BootROM imposes above mentioned limits.

BR,
Nikolaus

>
> ladis
>
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>>
>> - gpmc,sync-clk-ps = <0>;
>> + gpmc,device-width = <2>;
>> gpmc,cs-on-ns = <0>;
>> gpmc,cs-rd-off-ns = <44>;
>> gpmc,cs-wr-off-ns = <44>;
>> gpmc,adv-on-ns = <6>;
>> gpmc,adv-rd-off-ns = <34>;
>> gpmc,adv-wr-off-ns = <44>;
>> - gpmc,we-off-ns = <40>;
>> gpmc,oe-off-ns = <54>;
>> + gpmc,we-off-ns = <40>;
>> gpmc,access-ns = <64>;
>> gpmc,rd-cycle-ns = <82>;
>> gpmc,wr-cycle-ns = <82>;
>> gpmc,wr-access-ns = <40>;
>> gpmc,wr-data-mux-bus-ns = <0>;
>> - gpmc,device-width = <2>;
>> -
>> - #address-cells = <1>;
>> - #size-cells = <1>;
>> + gpmc,sync-clk-ps = <0>;
>>
>> x-loader@0 {
>> label = "X-Loader";
>> --
>> 2.12.2
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html