Re: [PATCH v2 1/4] soc: amlogic: add meson-canvas driver

From: Maxime Jourdan
Date: Fri Aug 10 2018 - 02:40:12 EST


2018-08-08 17:10 GMT+02:00 Neil Armstrong <narmstrong@xxxxxxxxxxxx>:
> On 08/08/2018 09:45, Jerome Brunet wrote:
>> On Wed, 2018-08-08 at 00:00 +0200, Maxime Jourdan wrote:
>>> Amlogic SoCs have a repository of 256 canvas which they use to
>>> describe pixel buffers.
>>>
>>> They contain metadata like width, height, block mode, endianness [..]
>>>
>>> Many IPs within those SoCs like vdec/vpu rely on those canvas to read/write
>>> pixels.
>>>
>>> Signed-off-by: Maxime Jourdan <maxi.jourdan@xxxxxxxxxx>
>>> Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>>
>> Thanks for making the changes Martin, I do prefer this version. You did not have
>> to drop the ops, until it is really needed because of some SoC quirks, I guess
>> it is simpler this way
>>
>> With some answers to the nitpicks below, feel free to add :
>>
>> Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>>
>>> ---
>>> drivers/soc/amlogic/Kconfig | 7 +
>>> drivers/soc/amlogic/Makefile | 1 +
>>> drivers/soc/amlogic/meson-canvas.c | 185 +++++++++++++++++++++++
>>> include/linux/soc/amlogic/meson-canvas.h | 65 ++++++++
>>> 4 files changed, 258 insertions(+)
>>> create mode 100644 drivers/soc/amlogic/meson-canvas.c
>>> create mode 100644 include/linux/soc/amlogic/meson-canvas.h
>>>
>>> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
>>> index b04f6e4aedbc..2f282b472912 100644
>>> --- a/drivers/soc/amlogic/Kconfig
>>> +++ b/drivers/soc/amlogic/Kconfig
>>> @@ -1,5 +1,12 @@
>>> menu "Amlogic SoC drivers"
>>>
>>> +config MESON_CANVAS
>>> + tristate "Amlogic Meson Canvas driver"
>>> + depends on ARCH_MESON || COMPILE_TEST
>>> + default n
>>> + help
>>> + Say yes to support the canvas IP for Amlogic SoCs.
>>> +
>>> config MESON_GX_SOCINFO
>>> bool "Amlogic Meson GX SoC Information driver"
>>> depends on ARCH_MESON || COMPILE_TEST
>>> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
>>> index 8fa321893928..0ab16d35ac36 100644
>>> --- a/drivers/soc/amlogic/Makefile
>>> +++ b/drivers/soc/amlogic/Makefile
>>> @@ -1,3 +1,4 @@
>>> +obj-$(CONFIG_MESON_CANVAS) += meson-canvas.o
>>> obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>>> obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>>> obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
>>> diff --git a/drivers/soc/amlogic/meson-canvas.c b/drivers/soc/amlogic/meson-canvas.c
>>> new file mode 100644
>>> index 000000000000..c461334b36d4
>>> --- /dev/null
>>> +++ b/drivers/soc/amlogic/meson-canvas.c
>>> @@ -0,0 +1,185 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (C) 2018 Maxime Jourdan <maxi.jourdan@xxxxxxxxxx>
>>> + * Copyright (C) 2016 BayLibre, SAS
>>> + * Author: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>>> + * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
>>> + * Copyright (C) 2014 Endless Mobile
>>> + */
>>> +
>>> +#include <linux/kernel.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/module.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/soc/amlogic/meson-canvas.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/io.h>
>>> +
>>> +#define NUM_CANVAS 256
>>> +
>>> +/* DMC Registers */
>>> +#define DMC_CAV_LUT_DATAL 0x48 /* 0x12 offset in data sheet */
>>> + #define CANVAS_WIDTH_LBIT 29
>>> + #define CANVAS_WIDTH_LWID 3
>>> +#define DMC_CAV_LUT_DATAH 0x4c /* 0x13 offset in data sheet */
>>> + #define CANVAS_WIDTH_HBIT 0
>>> + #define CANVAS_HEIGHT_BIT 9
>>> + #define CANVAS_BLKMODE_BIT 24
>>> +#define DMC_CAV_LUT_ADDR 0x50 /* 0x14 offset in data sheet */
>>> + #define CANVAS_LUT_WR_EN (0x2 << 8)
>>> + #define CANVAS_LUT_RD_EN (0x1 << 8)
>>> +
>>> +struct meson_canvas {
>>> + struct device *dev;
>>> + struct regmap *regmap_dmc;
>>> + spinlock_t lock; /* canvas device lock */
>>> + u8 used[NUM_CANVAS];
>>> +};
>>> +
>>> +struct meson_canvas *meson_canvas_get(struct device *dev)
>>> +{
>>> + struct device_node *canvas_node;
>>> + struct platform_device *canvas_pdev;
>>> + struct meson_canvas *canvas;
>>> +
>>> + canvas_node = of_parse_phandle(dev->of_node, "amlogic,canvas", 0);
>>> + if (!canvas_node)
>>> + return ERR_PTR(-ENODEV);
>>> +
>>> + canvas_pdev = of_find_device_by_node(canvas_node);
>>> + if (!canvas_pdev) {
>>> + dev_err(dev, "Unable to find canvas pdev\n");
>>> + return ERR_PTR(-ENODEV);
>>> + }
>
> I should be -EPROBE_DEFER here since the canvas driver maybe hasn't probed yet.

Ack.

>>> +
>>> + canvas = dev_get_drvdata(&canvas_pdev->dev);
>>> + if (!canvas)
>>> + return ERR_PTR(-ENODEV);
>>
>> You've got your device at this point, maybe EINVAL instead ?
>
> This shouldn't fail here... I'm not sure what should be the error.

I wasn't sure if it was possible to retrieve the pdev with a failed probe.

Should I just assume canvas will never be NULL here then ?

>>
>>> +
>>> + return canvas;
>>> +}
>>> +EXPORT_SYMBOL_GPL(meson_canvas_get);
>>> +
>>> +int meson_canvas_setup(struct meson_canvas *canvas, u8 canvas_index,
>>> + u32 addr, u32 stride, u32 height,
>>> + unsigned int wrap,
>>> + unsigned int blkmode,
>>> + unsigned int endian)
>>> +{
>>> + struct regmap *regmap = canvas->regmap_dmc;
>>> + unsigned long flags;
>>> + u32 val;
>>> +
>>> + spin_lock_irqsave(&canvas->lock, flags);
>>> + if (!canvas->used[canvas_index]) {
>>> + dev_err(canvas->dev,
>>> + "Trying to setup non allocated canvas %u\n",
>>> + canvas_index);
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + regmap_write(regmap, DMC_CAV_LUT_DATAL,
>>> + ((addr + 7) >> 3) |
>>> + (((stride + 7) >> 3) << CANVAS_WIDTH_LBIT));
>>> +
>>> + regmap_write(regmap, DMC_CAV_LUT_DATAH,
>>> + ((((stride + 7) >> 3) >> CANVAS_WIDTH_LWID) <<
>>> + CANVAS_WIDTH_HBIT) |
>>> + (height << CANVAS_HEIGHT_BIT) |
>>> + (wrap << 22) |
>>> + (blkmode << CANVAS_BLKMODE_BIT) |
>>> + (endian << 26));
>>> +
>>> + regmap_write(regmap, DMC_CAV_LUT_ADDR,
>>> + CANVAS_LUT_WR_EN | canvas_index);
>>> +
>>> + /* Force a read-back to make sure everything is flushed. */
>>> + regmap_read(regmap, DMC_CAV_LUT_DATAH, &val);
>>
>> I suppose this something you got from the vendor kernel ? Out of curiosity, have
>> you tried w/o it ? I am wondering if this is really necessary ?
>
>
> It's explicit in the Amlogic source, you need a readback to make sure it's taken in account.
>
>>
>>
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(meson_canvas_setup);
>>> +
>>> +int meson_canvas_alloc(struct meson_canvas *canvas, u8 *canvas_index)
>>> +{
>>> + int i;
>>> + unsigned long flags;
>>> +
>>> + spin_lock_irqsave(&canvas->lock, flags);
>>> + for (i = 0; i < NUM_CANVAS; ++i) {
>>> + if (!canvas->used[i]) {
>>> + canvas->used[i] = 1;
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> + *canvas_index = i;
>>> + return 0;
>>> + }
>>> + }
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> +
>>> + dev_err(canvas->dev, "No more canvas available\n");
>>> + return -ENODEV;
>>> +}
>>> +EXPORT_SYMBOL_GPL(meson_canvas_alloc);
>>> +
>>> +int meson_canvas_free(struct meson_canvas *canvas, u8 canvas_index)
>>> +{
>>> + unsigned long flags;
>>> +
>>> + spin_lock_irqsave(&canvas->lock, flags);
>>> + if (!canvas->used[canvas_index]) {
>>> + dev_err(canvas->dev,
>>> + "Trying to free unused canvas %u\n", canvas_index);
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> + return -EINVAL;
>>> + }
>>> + canvas->used[canvas_index] = 0;
>>> + spin_unlock_irqrestore(&canvas->lock, flags);
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(meson_canvas_free);
>>> +
>>> +static int meson_canvas_probe(struct platform_device *pdev)
>>> +{
>>> + struct device *dev = &pdev->dev;
>>> + struct meson_canvas *canvas;
>>> +
>>> + canvas = devm_kzalloc(dev, sizeof(*canvas), GFP_KERNEL);
>>> + if (!canvas)
>>> + return -ENOMEM;
>>> +
>>> + canvas->regmap_dmc =
>>> + syscon_node_to_regmap(of_get_parent(dev->of_node));
>>> + if (IS_ERR(canvas->regmap_dmc)) {
>>> + dev_err(dev, "failed to get DMC regmap\n");
>>> + return PTR_ERR(canvas->regmap_dmc);
>>> + }
>>> +
>>> + canvas->dev = dev;
>>> + spin_lock_init(&canvas->lock);
>>> + dev_set_drvdata(dev, canvas);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct of_device_id canvas_dt_match[] = {
>>> + { .compatible = "amlogic,canvas" },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, canvas_dt_match);
>>> +
>>> +static struct platform_driver meson_canvas_driver = {
>>> + .probe = meson_canvas_probe,
>>> + .driver = {
>>> + .name = "amlogic-canvas",
>>> + .of_match_table = canvas_dt_match,
>>> + },
>>> +};
>>> +module_platform_driver(meson_canvas_driver);
>>> +
>>> +MODULE_DESCRIPTION("Amlogic Canvas driver");
>>> +MODULE_AUTHOR("Maxime Jourdan <maxi.jourdan@xxxxxxxxxx>");
>>> +MODULE_LICENSE("GPL");
>>> diff --git a/include/linux/soc/amlogic/meson-canvas.h b/include/linux/soc/amlogic/meson-canvas.h
>>> new file mode 100644
>>> index 000000000000..c164202d8e39
>>> --- /dev/null
>>> +++ b/include/linux/soc/amlogic/meson-canvas.h
>>> @@ -0,0 +1,65 @@
>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/*
>>> + * Copyright (C) 2018 Maxime Jourdan <maxi.jourdan@xxxxxxxxxx>
>>> + */
>>> +#ifndef MESON_CANVAS_H
>>> +#define MESON_CANVAS_H
>>> +
>>> +#include <linux/kernel.h>
>>> +
>>> +#define MESON_CANVAS_WRAP_NONE 0x00
>>> +#define MESON_CANVAS_WRAP_X 0x01
>>> +#define MESON_CANVAS_WRAP_Y 0x02
>>> +
>>> +#define MESON_CANVAS_BLKMODE_LINEAR 0x00
>>> +#define MESON_CANVAS_BLKMODE_32x32 0x01
>>> +#define MESON_CANVAS_BLKMODE_64x64 0x02
>>> +
>>> +#define MESON_CANVAS_ENDIAN_SWAP16 0x1
>>> +#define MESON_CANVAS_ENDIAN_SWAP32 0x3
>>> +#define MESON_CANVAS_ENDIAN_SWAP64 0x7
>>> +#define MESON_CANVAS_ENDIAN_SWAP128 0xf
>>> +
>>> +struct meson_canvas;
>>> +
>>> +/**
>>> + * meson_canvas_get() - get a canvas provider instance
>>> + *
>>> + * @dev: your device
>>
>> s/your device/consumer device pointer ?
>>

Ack.

>>> + */
>>> +struct meson_canvas *meson_canvas_get(struct device *dev);
>>> +
>>> +/**
>>> + * meson_canvas_alloc() - take ownership of a canvas
>>> + *
>>> + * @canvas: canvas provider instance retrieved from meson_canvas_get()
>>> + * @canvas_index: will be filled with the canvas ID
>>> + */
>>> +int meson_canvas_alloc(struct meson_canvas *canvas, u8 *canvas_index);
>>> +
>>> +/**
>>> + * meson_canvas_free() - remove ownership from a canvas
>>> + *
>>> + * @canvas: canvas provider instance retrieved from meson_canvas_get()
>>> + * @canvas_index: canvas ID that was obtained via meson_canvas_alloc()
>>> + */
>>> +int meson_canvas_free(struct meson_canvas *canvas, u8 canvas_index);
>>> +
>>> +/**
>>> + * meson_canvas_setup() - configure a canvas
>>> + *
>>> + * @canvas: canvas provider instance retrieved from meson_canvas_get()
>>> + * @canvas_index: canvas ID that was obtained via meson_canvas_alloc()
>>> + * @addr: physical address to the pixel buffer
>>> + * @stride: width of the buffer
>>> + * @height: height of the buffer
>>> + * @wrap: undocumented
>>> + * @blkmode: block mode (linear, 32x32, 64x64)
>>> + * @endian: byte swapping (swap16, swap32, swap64, swap128)
>>> + */
>>> +int meson_canvas_setup(struct meson_canvas *canvas, u8 canvas_index,
>>> + u32 addr, u32 stride, u32 height,
>>> + unsigned int wrap, unsigned int blkmode,
>>> + unsigned int endian);
>>> +
>>> +#endif
>>
>>
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

Maxime