[PATCH v4 1/6] Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"

[Leonard Crestez]

This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d.

That commit followed the reference manual but unfortunately the imx7d
manual is incorrect.

Tested with ath9k pcie card and confirmed internally.

Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Acked-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/imx7d.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ffa4b3a..7234e8330a57 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -124,14 +124,18 @@
 		num-lanes = <1>;
 		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * Reference manual lists pci irqs incorrectly
+		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+		 */
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
 			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
 			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
 		clock-names = "pcie", "pcie_bus", "pcie_phy";
 		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-- 
2.17.1