Re: [PATCH v3 2/2] pinctrl: meson-g12a: add pinctrl driver support

From: Linus Walleij
Date: Wed Aug 29 2018 - 04:33:37 EST

On Tue, Aug 7, 2018 at 4:07 AM Yixun Lan <yixun.lan@xxxxxxxxxxx> wrote:

> Add the pinctrl driver for Meson-G12A SoC which share the similar IP as
> the previous Meson-AXG SoC, both use same pinmux ops (register layout).
> A new driver is needed here due to the differences in the pins.
> Starting from Meson-AXG SoC, the pinctrl controller block use 4
> continues register bits to specific the pin mux function, while comparing
> to old generation SoC which using variable length register bits for
> the pin mux definition. The new design greatly simplify the software model.
> For the detail example, one 32bit register can be divided into 8 parts,
> each has 4 bits whose value start from 0 - 7, each can describe one pin,
> the value 0 is always devoted to GPIO function, while 1 - 7 devoted to
> the mux pin function.
> Please note, the GPIOE is actually located at AO (always on) bank.
> Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> Signed-off-by: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>

Patch applied for v4.20.

Linus Walleij