Re: [PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin

[Heiko Schocher]

Hello SÃbastien,

Am 30.08.2018 um 15:25 schrieb SÃbastien Szymanski:
> Hi,
>
> On 08/30/2018 02:47 PM, Heiko Schocher wrote:
> > on the imx6ull the input_val for uart5 rx function
> > of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
> > is 7 and not 5 as on the imx6ul. With this
> > patch, console on an imx6ull based board works
> > with uart5.
> >
> > Signed-off-by: Heiko Schocher <hs@xxxxxxx>
>
> This is already fixed on v4.19-rc1 and also on a few others PADs that
> have similar issue.
> Moreover signals common for both i.MX6UL and i.MX6ULL should have
> IMX6UL_ as prefix:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=387301d5b88e2fe91de9baf4ca25f771cc633f70

My patch was based on current HEAD ...Ah, got it, this patch is in
"for-next"

Thanks! And sorry for the noise.

bye,
Heiko
> Regards,
>
> > ---
> >
> >   arch/arm/boot/dts/imx6ull-pinfunc.h | 1 +
> >   1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
> > index fdc46bb09cc1a..d835aeae5485b 100644
> > --- a/arch/arm/boot/dts/imx6ull-pinfunc.h
> > +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
> > @@ -61,5 +61,6 @@
> >   #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
> >   #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
> >   #define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
> > +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00C0 0x034C 0x0644 0 7
> >   
> >   #endif /* __DTS_IMX6ULL_PINFUNC_H */

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs@xxxxxxx