[RFC PATCH v2 1/3] firmware: xilinx: Add reset API's

From: Nava kishore Manne
Date: Wed Sep 05 2018 - 02:42:11 EST

Next message: Michal Hocko: "Re: [PATCH] arm64: add NUMA emulation support"
Previous message: Nava kishore Manne: "[RFC PATCH v2 0/3] Add reset driver support for ZynqMP"
In reply to: Nava kishore Manne: "[RFC PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This Patch Adds reset API's to support release, assert
and status functionalities by using firmware interface.

Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
---
Changes for v2:
-New Patch.

drivers/firmware/xilinx/zynqmp.c | 40 +++++++++++
include/linux/firmware/xlnx-zynqmp.h | 136 +++++++++++++++++++++++++++++++++++
2 files changed, 176 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7ccedf0..639c72f 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -447,6 +447,44 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
return ret;
}

+/**
+ * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
+ * @reset: Reset to be configured
+ * @assert_flag: Flag stating should reset be asserted (1) or
+ * released (0)
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
+ const enum zynqmp_pm_reset_action assert_flag)
+{
+ return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
+ 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_reset_get_status - Get status of the reset
+ * @reset: Reset whose status should be returned
+ * @status: Returned status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
+ u32 *status)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!status)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
+ 0, 0, ret_payload);
+ *status = ret_payload[1];
+
+ return ret;
+}
+
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.ioctl = zynqmp_pm_ioctl,
@@ -460,6 +498,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
+ .reset_assert = zynqmp_pm_reset_assert,
+ .reset_get_status = zynqmp_pm_reset_get_status,
};

/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 58a7478..93decf5 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -34,6 +34,8 @@

enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_RESET_ASSERT = 17,
+ PM_RESET_GET_STATUS,
PM_IOCTL = 34,
PM_QUERY_DATA,
PM_CLOCK_ENABLE,
@@ -74,6 +76,137 @@ enum pm_query_id {
PM_QID_CLOCK_GET_ATTRIBUTES,
};

+enum zynqmp_pm_reset_action {
+ PM_RESET_ACTION_RELEASE,
+ PM_RESET_ACTION_ASSERT,
+ PM_RESET_ACTION_PULSE,
+};
+
+enum zynqmp_pm_reset {
+ ZYNQMP_PM_RESET_START = 999,
+ ZYNQMP_PM_RESET_PCIE_CFG,
+ ZYNQMP_PM_RESET_PCIE_BRIDGE,
+ ZYNQMP_PM_RESET_PCIE_CTRL,
+ ZYNQMP_PM_RESET_DP,
+ ZYNQMP_PM_RESET_SWDT_CRF,
+ ZYNQMP_PM_RESET_AFI_FM5,
+ ZYNQMP_PM_RESET_AFI_FM4,
+ ZYNQMP_PM_RESET_AFI_FM3,
+ ZYNQMP_PM_RESET_AFI_FM2,
+ ZYNQMP_PM_RESET_AFI_FM1,
+ ZYNQMP_PM_RESET_AFI_FM0,
+ ZYNQMP_PM_RESET_GDMA,
+ ZYNQMP_PM_RESET_GPU_PP1,
+ ZYNQMP_PM_RESET_GPU_PP0,
+ ZYNQMP_PM_RESET_GPU,
+ ZYNQMP_PM_RESET_GT,
+ ZYNQMP_PM_RESET_SATA,
+ ZYNQMP_PM_RESET_ACPU3_PWRON,
+ ZYNQMP_PM_RESET_ACPU2_PWRON,
+ ZYNQMP_PM_RESET_ACPU1_PWRON,
+ ZYNQMP_PM_RESET_ACPU0_PWRON,
+ ZYNQMP_PM_RESET_APU_L2,
+ ZYNQMP_PM_RESET_ACPU3,
+ ZYNQMP_PM_RESET_ACPU2,
+ ZYNQMP_PM_RESET_ACPU1,
+ ZYNQMP_PM_RESET_ACPU0,
+ ZYNQMP_PM_RESET_DDR,
+ ZYNQMP_PM_RESET_APM_FPD,
+ ZYNQMP_PM_RESET_SOFT,
+ ZYNQMP_PM_RESET_GEM0,
+ ZYNQMP_PM_RESET_GEM1,
+ ZYNQMP_PM_RESET_GEM2,
+ ZYNQMP_PM_RESET_GEM3,
+ ZYNQMP_PM_RESET_QSPI,
+ ZYNQMP_PM_RESET_UART0,
+ ZYNQMP_PM_RESET_UART1,
+ ZYNQMP_PM_RESET_SPI0,
+ ZYNQMP_PM_RESET_SPI1,
+ ZYNQMP_PM_RESET_SDIO0,
+ ZYNQMP_PM_RESET_SDIO1,
+ ZYNQMP_PM_RESET_CAN0,
+ ZYNQMP_PM_RESET_CAN1,
+ ZYNQMP_PM_RESET_I2C0,
+ ZYNQMP_PM_RESET_I2C1,
+ ZYNQMP_PM_RESET_TTC0,
+ ZYNQMP_PM_RESET_TTC1,
+ ZYNQMP_PM_RESET_TTC2,
+ ZYNQMP_PM_RESET_TTC3,
+ ZYNQMP_PM_RESET_SWDT_CRL,
+ ZYNQMP_PM_RESET_NAND,
+ ZYNQMP_PM_RESET_ADMA,
+ ZYNQMP_PM_RESET_GPIO,
+ ZYNQMP_PM_RESET_IOU_CC,
+ ZYNQMP_PM_RESET_TIMESTAMP,
+ ZYNQMP_PM_RESET_RPU_R50,
+ ZYNQMP_PM_RESET_RPU_R51,
+ ZYNQMP_PM_RESET_RPU_AMBA,
+ ZYNQMP_PM_RESET_OCM,
+ ZYNQMP_PM_RESET_RPU_PGE,
+ ZYNQMP_PM_RESET_USB0_CORERESET,
+ ZYNQMP_PM_RESET_USB1_CORERESET,
+ ZYNQMP_PM_RESET_USB0_HIBERRESET,
+ ZYNQMP_PM_RESET_USB1_HIBERRESET,
+ ZYNQMP_PM_RESET_USB0_APB,
+ ZYNQMP_PM_RESET_USB1_APB,
+ ZYNQMP_PM_RESET_IPI,
+ ZYNQMP_PM_RESET_APM_LPD,
+ ZYNQMP_PM_RESET_RTC,
+ ZYNQMP_PM_RESET_SYSMON,
+ ZYNQMP_PM_RESET_AFI_FM6,
+ ZYNQMP_PM_RESET_LPD_SWDT,
+ ZYNQMP_PM_RESET_FPD,
+ ZYNQMP_PM_RESET_RPU_DBG1,
+ ZYNQMP_PM_RESET_RPU_DBG0,
+ ZYNQMP_PM_RESET_DBG_LPD,
+ ZYNQMP_PM_RESET_DBG_FPD,
+ ZYNQMP_PM_RESET_APLL,
+ ZYNQMP_PM_RESET_DPLL,
+ ZYNQMP_PM_RESET_VPLL,
+ ZYNQMP_PM_RESET_IOPLL,
+ ZYNQMP_PM_RESET_RPLL,
+ ZYNQMP_PM_RESET_GPO3_PL_0,
+ ZYNQMP_PM_RESET_GPO3_PL_1,
+ ZYNQMP_PM_RESET_GPO3_PL_2,
+ ZYNQMP_PM_RESET_GPO3_PL_3,
+ ZYNQMP_PM_RESET_GPO3_PL_4,
+ ZYNQMP_PM_RESET_GPO3_PL_5,
+ ZYNQMP_PM_RESET_GPO3_PL_6,
+ ZYNQMP_PM_RESET_GPO3_PL_7,
+ ZYNQMP_PM_RESET_GPO3_PL_8,
+ ZYNQMP_PM_RESET_GPO3_PL_9,
+ ZYNQMP_PM_RESET_GPO3_PL_10,
+ ZYNQMP_PM_RESET_GPO3_PL_11,
+ ZYNQMP_PM_RESET_GPO3_PL_12,
+ ZYNQMP_PM_RESET_GPO3_PL_13,
+ ZYNQMP_PM_RESET_GPO3_PL_14,
+ ZYNQMP_PM_RESET_GPO3_PL_15,
+ ZYNQMP_PM_RESET_GPO3_PL_16,
+ ZYNQMP_PM_RESET_GPO3_PL_17,
+ ZYNQMP_PM_RESET_GPO3_PL_18,
+ ZYNQMP_PM_RESET_GPO3_PL_19,
+ ZNQMP_PM_RESET_GPO3_PL_20,
+ ZYNQMP_PM_RESET_GPO3_PL_21,
+ ZYNQMP_PM_RESET_GPO3_PL_22,
+ ZYNQMP_PM_RESET_GPO3_PL_23,
+ ZYNQMP_PM_RESET_GPO3_PL_24,
+ ZYNQMP_PM_RESET_GPO3_PL_25,
+ ZYNQMP_PM_RESET_GPO3_PL_26,
+ ZYNQMP_PM_RESET_GPO3_PL_27,
+ ZYNQMP_PM_RESET_GPO3_PL_28,
+ ZYNQMP_PM_RESET_GPO3_PL_29,
+ ZYNQMP_PM_RESET_GPO3_PL_30,
+ ZYNQMP_PM_RESET_GPO3_PL_31,
+ ZYNQMP_PM_RESET_RPU_LS,
+ ZYNQMP_PM_RESET_PS_ONLY,
+ ZYNQMP_PM_RESET_PL,
+ ZYNQMP_PM_RESET_PS_PL0,
+ ZYNQMP_PM_RESET_PS_PL1,
+ ZYNQMP_PM_RESET_PS_PL2,
+ ZYNQMP_PM_RESET_PS_PL3,
+ ZYNQMP_PM_RESET_END
+};
+
/**
* struct zynqmp_pm_query_data - PM query data
* @qid: query ID
@@ -101,6 +234,9 @@ struct zynqmp_eemi_ops {
int (*clock_getrate)(u32 clock_id, u64 *rate);
int (*clock_setparent)(u32 clock_id, u32 parent_id);
int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+ int (*reset_assert)(const enum zynqmp_pm_reset reset,
+ const enum zynqmp_pm_reset_action assert_flag);
+ int (*reset_get_status)(const enum zynqmp_pm_reset reset, u32 *status);
};

#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
--
2.7.4

Next message: Michal Hocko: "Re: [PATCH] arm64: add NUMA emulation support"
Previous message: Nava kishore Manne: "[RFC PATCH v2 0/3] Add reset driver support for ZynqMP"
In reply to: Nava kishore Manne: "[RFC PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]