Re: [PATCH v10 06/26] s390: vfio-ap: sysfs interfaces to configure adapters

From: Harald Freudenberger
Date: Fri Sep 21 2018 - 05:52:57 EST


On 21.09.2018 11:40, Cornelia Huck wrote:
> On Wed, 12 Sep 2018 15:42:56 -0400
> Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx> wrote:
>
>> From: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
>>
>> Introduces two new sysfs attributes for the VFIO mediated
>> matrix device for assigning AP adapters to and unassigning
>> AP adapters from a mediated matrix device. The IDs of the
>> AP adapters assigned to the mediated matrix device will be
>> stored in an AP mask (APM).
>>
>> The bits in the APM, from most significant to least significant
>> bit, correspond to AP adapter IDs (APID) 0 to 255. On
>> some systems, the maximum allowable adapter number may be less
>> than 255 - depending upon the host's AP configuration - and
>> assignment may be rejected if the input adapter ID exceeds the
>> limit.
>>
>> When an adapter is assigned, the bit corresponding to the APID
>> will be set in the APM. Likewise, when an adapter is
>> unassigned, the bit corresponding to the APID will be cleared
>> from the APM.
>>
>> In order to successfully assign an adapter, the APQNs derived from
>> the adapter ID being assigned and the queue indexes of all domains
>> previously assigned:
>>
>> 1. Must be bound to the vfio_ap device driver.
>>
>> 2. Must not be assigned to any other mediated matrix device
>>
>> If there are no domains assigned to the mdev, then there must
>> be an AP queue bound to the vfio_ap device driver with an
>> APQN containing the APID, otherwise all domains
>> subsequently assigned will fail because there will be no
>> AP queues bound with an APQN containing the adapter ID.
>>
>> Assigning or un-assigning an AP adapter will be rejected if
>> a guest using the mediated matrix device is running.
>>
>> The relevant sysfs structures are:
>>
>> /sys/devices/vfio_ap/matrix/
>> ...... [mdev_supported_types]
>> ......... [vfio_ap-passthrough]
>> ............ [devices]
>> ...............[$uuid]
>> .................. assign_adapter
>> .................. unassign_adapter
>>
>> To assign an adapter to the $uuid mediated matrix device's APM,
>> write the APID to the assign_adapter file. To unassign an adapter,
>> write the APID to the unassign_adapter file. The APID is specified
>> using conventional semantics: If it begins with 0x the number will
>> be parsed as a hexadecimal number; if it begins with a 0 the number
>> will be parsed as an octal number; otherwise, it will be parsed as a
>> decimal number.
>>
>> For example, to assign adapter 173 (0xad) to the mediated matrix
>> device $uuid:
>>
>> echo 173 > assign_adapter
>>
>> or
>>
>> echo 0xad > assign_adapter
>>
>> or
>>
>> echo 0255 > assign_adapter
>>
>> To unassign adapter 173 (0xad):
>>
>> echo 173 > unassign_adapter
>>
>> or
>>
>> echo 0xad > unassign_adapter
>>
>> or
>>
>> echo 0255 > unassign_adapter
>>
>> Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
>> Reviewed-by: Halil Pasic <pasic@xxxxxxxxxxxxx>
>> Tested-by: Michael Mueller <mimu@xxxxxxxxxxxxx>
>> Tested-by: Farhan Ali <alifm@xxxxxxxxxxxxx>
>> Tested-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
>> Signed-off-by: Christian Borntraeger <borntraeger@xxxxxxxxxx>
>> ---
>> drivers/s390/crypto/vfio_ap_ops.c | 295 +++++++++++++++++++++++++++++++++++++
>> 1 files changed, 295 insertions(+), 0 deletions(-)
> (...)
>
>> +/**
>> + * vfio_ap_mdev_verify_no_sharing
>> + *
>> + * Verifies that the APQNs derived from the cross product of the AP adapter IDs
>> + * and AP queue indexes comprising the AP matrix are not configured for another
>> + * mediated device. AP queue sharing is not allowed.
>> + *
>> + * @kvm: the KVM guest
>> + * @matrix: the AP matrix
>> + *
>> + * Returns 0 if the APQNs are not shared, otherwise; returns -EADDRINUSE.
>> + */
>> +static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
>> +{
>> + int nbits;
>> + struct ap_matrix_mdev *lstdev;
>> + unsigned long apm[BITS_TO_LONGS(matrix_mdev->matrix.apm_max + 1)];
>> + unsigned long aqm[BITS_TO_LONGS(matrix_mdev->matrix.aqm_max + 1)];
> Can you please convert this to use a fixed-size array? I think
> {apm,aqm}_max has an upper bound of 255?
>
> (Also, this can use DECLARE_BITMAP.)
In ap_bus.h there are upper limit defines for this:

#define AP_DEVICES 256ÂÂÂ ÂÂÂ /* Number of AP devices. */
#define AP_DOMAINS 256ÂÂÂ ÂÂÂ /* Number of AP domains. */

>
>> +
>> + list_for_each_entry(lstdev, &matrix_dev->mdev_list, node) {
>> + if (matrix_mdev == lstdev)
>> + continue;
>> +
>> + memset(apm, 0, sizeof(apm));
>> + memset(aqm, 0, sizeof(aqm));
>> +
>> + /*
>> + * We work on full longs, as we can only exclude the leftover
>> + * bits in non-inverse order. The leftover is all zeros.
>> + */
>> + nbits = sizeof(apm) * BITS_PER_BYTE;
>> + if (!bitmap_and(apm, matrix_mdev->matrix.apm,
>> + lstdev->matrix.apm, nbits))
>> + continue;
>> +
>> + nbits = sizeof(aqm) * BITS_PER_BYTE;
>> + if (!bitmap_and(aqm, matrix_mdev->matrix.aqm,
>> + lstdev->matrix.aqm, nbits))
>> + continue;
>> +
>> + return -EADDRINUSE;
>> + }
>> +
>> + return 0;
>> +}