Re: [PATCH v3 0/4] Add 96Boards Rock960 CE board support

From: Heiko Stuebner
Date: Sat Sep 22 2018 - 16:57:41 EST


Am Donnerstag, 13. September 2018, 20:05:41 CEST schrieb Manivannan Sadhasivam:
> This patchset adds 96Boards Rock960 CE board support. Rock960 CE
> (Consumer Edition) board is one of the member of 96Boards Consumer
> Edition and AI platform and is manufactured by Vamrs Limited. Most of
> the board configuration is shared with the Ficus board manufactured by
> vamrs, which is an Enterprise 96Board.
>
> For the sake of avoiding code duplication, a common rock960.dtsi file
> with common DT nodes for both boards and separate board specific DTS
> files has been added.
>
> To be specific, below are some of the key differences between both
> boards:
>
> 1. Different host enable GPIO for USB
> 2. Different power and reset GPIO for PCI-E
> 3. No Ethernet port on Rock960
>
> While adding the board support, SD card Chip detection support is also
> added to the common dtsi file, shared by both boards.
>
> This series has been tested on Rock960 CE v1.2 board.
>
> Thanks,
> Mani
>
> Changes in v3:
>
> * Moved usb and pcie nodes to common dtsi and kept only the properties
> which differ in board specific dts.
> * Updated the common dtsi commit description.
>
> Changes in v2:
>
> * Changed the board compatible to "vamrs,rock960"
>
> Manivannan Sadhasivam (4):
> arm64: dts: rockchip: Split out common nodes for Rock960 based boards
> dt-bindings: arm: rockchip: Add binding for Rock960 board
> arm64: boot: dts: rockchip: Add support for Rock960 board
> arm64: dts: rockchip: Enable SD card detection for Rock960 boards

applied all 4 for 4.20, after fixing the subject of patch3 (-boot:)
and adapting to recent Makefile changes as pointed out by
Ezequiel.

Heiko