Re: [PATCH] reset: socfpga: add an early reset driver for SoCFPGA

From: Dinh Nguyen
Date: Wed Sep 26 2018 - 09:41:59 EST


Ping?

On 09/17/2018 09:50 AM, Dinh Nguyen wrote:
> Create a separate reset driver that uses the reset operations in reset-simple.
> The reset driver for the SoCFPGA platform needs to register early in order to
> be able bring online timers that needed early in the kernel bootup.
>
> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> ---
> arch/arm/mach-socfpga/socfpga.c | 4 ++
> drivers/reset/Kconfig | 7 ++++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-simple.c | 17 ---------
> drivers/reset/reset-socfpga.c | 85 +++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 97 insertions(+), 17 deletions(-)
> create mode 100644 drivers/reset/reset-socfpga.c
>
> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
> index dde14f7..cc64576 100644
> --- a/arch/arm/mach-socfpga/socfpga.c
> +++ b/arch/arm/mach-socfpga/socfpga.c
> @@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr;
> void __iomem *sdr_ctl_base_addr;
> unsigned long socfpga_cpu1start_addr;
>
> +extern void __init socfpga_reset_init(void);
> +
> void __init socfpga_sysmgr_init(void)
> {
> struct device_node *np;
> @@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void)
>
> if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
> socfpga_init_ocram_ecc();
> + socfpga_reset_init();
> }
>
> static void __init socfpga_arria10_init_irq(void)
> @@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void)
> socfpga_init_arria10_l2_ecc();
> if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
> socfpga_init_arria10_ocram_ecc();
> + socfpga_reset_init();
> }
>
> static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 13d28fd..dcc5f1d 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -119,6 +119,13 @@ config RESET_STM32MP157
> help
> This enables the RCC reset controller driver for STM32 MPUs.
>
> +config RESET_SOCFPGA
> + bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
> + default ARCH_SOCFPGA
> + select RESET_SIMPLE
> + help
> + This enables the reset driver for SoCFPGA.
> +
> config RESET_SUNXI
> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
> default ARCH_SUNXI
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 4243c38..d09bb41 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
> +obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
> obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> index a91107f..483824f 100644
> --- a/drivers/reset/reset-simple.c
> +++ b/drivers/reset/reset-simple.c
> @@ -106,21 +106,12 @@ struct reset_simple_devdata {
> bool status_active_low;
> };
>
> -#define SOCFPGA_NR_BANKS 8
> -
> -static const struct reset_simple_devdata reset_simple_socfpga = {
> - .reg_offset = 0x10,
> - .nr_resets = SOCFPGA_NR_BANKS * 32,
> - .status_active_low = true,
> -};
> -
> static const struct reset_simple_devdata reset_simple_active_low = {
> .active_low = true,
> .status_active_low = true,
> };
>
> static const struct of_device_id reset_simple_dt_ids[] = {
> - { .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
> { .compatible = "st,stm32-rcc", },
> { .compatible = "allwinner,sun6i-a31-clock-reset",
> .data = &reset_simple_active_low },
> @@ -166,14 +157,6 @@ static int reset_simple_probe(struct platform_device *pdev)
> data->status_active_low = devdata->status_active_low;
> }
>
> - if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") &&
> - of_property_read_u32(dev->of_node, "altr,modrst-offset",
> - &reg_offset)) {
> - dev_warn(dev,
> - "missing altr,modrst-offset property, assuming 0x%x!\n",
> - reg_offset);
> - }
> -
> data->membase += reg_offset;
>
> return devm_reset_controller_register(dev, &data->rcdev);
> diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
> new file mode 100644
> index 0000000..b6e8fe8
> --- /dev/null
> +++ b/drivers/reset/reset-socfpga.c
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018, Intel Corporation
> + * Copied from reset-sunxi.c
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>
> +
> +#include "reset-simple.h"
> +
> +static int a10_reset_init(struct device_node *np)
> +{
> + struct reset_simple_data *data;
> + struct resource res;
> + resource_size_t size;
> + int ret;
> + u32 reg_offset = 0;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + ret = of_address_to_resource(np, 0, &res);
> + if (ret)
> + goto err_alloc;
> +
> + size = resource_size(&res);
> + if (!request_mem_region(res.start, size, np->name)) {
> + ret = -EBUSY;
> + goto err_alloc;
> + }
> +
> + data->membase = ioremap(res.start, size);
> + if (!data->membase) {
> + ret = -ENOMEM;
> + goto err_alloc;
> + }
> +
> + if (of_property_read_u32(np, "altr,modrst-offset", &reg_offset))
> + pr_warn("missing altr,modrst-offset property, assuming 0x0\n");
> + data->membase += reg_offset;
> +
> + spin_lock_init(&data->lock);
> +
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.nr_resets = 32 * 8;
> + data->rcdev.ops = &reset_simple_ops;
> + data->rcdev.of_node = np;
> + data->status_active_low = true;
> +
> + return reset_controller_register(&data->rcdev);
> +
> +err_alloc:
> + kfree(data);
> + return ret;
> +};
> +
> +/*
> + * These are the reset controller we need to initialize early on in
> + * our system, before we can even think of using a regular device
> + * driver for it.
> + * The controllers that we can register through the regular device
> + * model are handled by the simple reset driver directly.
> + */
> +static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = {
> + { .compatible = "altr,rst-mgr", },
> + { /* sentinel */ },
> +};
> +
> +void __init socfpga_reset_init(void)
> +{
> + struct device_node *np;
> +
> + for_each_matching_node(np, socfpga_early_reset_dt_ids)
> + a10_reset_init(np);
> +}
>