[PATCH 09/11] ALSA: hda/ca0132 - Remove input select enum for ZxR

From: Connor McAdams
Date: Sat Sep 29 2018 - 23:04:28 EST


This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.

Signed-off-by: Connor McAdams <conmanx360@xxxxxxxxx>
---
sound/pci/hda/patch_ca0132.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index bc8745f..f0781e4 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -6402,8 +6402,13 @@ static int ca0132_build_controls(struct hda_codec *codec)
*/
if (spec->use_alt_functions) {
ca0132_alt_add_output_enum(codec);
- ca0132_alt_add_input_enum(codec);
ca0132_alt_add_mic_boost_enum(codec);
+ /*
+ * ZxR only has microphone input, there is no front panel
+ * header on the card, and aux-in is handled by the DBPro board.
+ */
+ if (spec->quirk != QUIRK_ZXR)
+ ca0132_alt_add_input_enum(codec);
}

if (spec->quirk == QUIRK_AE5) {
@@ -7665,6 +7670,14 @@ static void ca0132_init_chip(struct hda_codec *codec)
spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID] = 1;
spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] = 0;

+ /*
+ * The ZxR doesn't have a front panel header, and it's line-in is on
+ * the daughter board. So, there is no input enum control, and we need
+ * to make sure that spec->in_enum_val is set properly.
+ */
+ if (spec->quirk == QUIRK_ZXR)
+ spec->in_enum_val = REAR_MIC;
+
#ifdef ENABLE_TUNING_CONTROLS
ca0132_init_tuning_defaults(codec);
#endif
--
2.7.4