Re: [PATCH v5 3/3] gpiolib: Show correct direction from the beginning

[Jeffrey Hugo]

On 10/5/2018 10:54 AM, Timur Tabi wrote:
> On 10/05/2018 11:17 AM, Jeffrey Hugo wrote:>
> > Looks like the driver is initing just fine to me.  Is setting up the
> > jumpers and running gpio-test warranted?
>
> Well, that test only makes sure that input/output is actually working
> on the hardware level, but it also makes sure that the GPIOs are
> numbered correctly.
>
> If you want, just put a printk(... offset) in msm_gpio_get() and read
> from a GPIO that you know you have access to, and make sure the
> 'offset' is correct.
>
> Then try reading from a GPIO that you don't have access to, and make
> sure you get a failure before msm_gpio_get() is called.

Done.

For the series:

Tested-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>

--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.