Re: [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator

[Jon Hunter]

On 09/10/18 16:25, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> 
> Fix HDMI requiring two regulators being enabled by a single GPIO. Model
> this using an intermediate reg_en_vdd_hdmi regulator being the
> vin-supply of them other two. This fixes the display subsystem and gets
> rid of the following error during boot:
> 
>  reg-fixed-voltage: probe of regulator-3v3-avdd-hdmi failed with error -16
>  tegra-hdmi 54280000.hdmi: failed to get VDD regulator
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> 
> ---
> 
> Changes in v1: None
> 
>  arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 16 ++++++++++++----
>  arch/arm/boot/dts/tegra30-apalis.dtsi      | 16 ++++++++++++----
>  arch/arm/boot/dts/tegra30-colibri.dtsi     | 16 ++++++++++++----
>  3 files changed, 36 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> index 02f8126481a2..065a24ac1052 100644
> --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> @@ -1133,8 +1133,7 @@
>  		regulator-min-microvolt = <1800000>;
>  		regulator-max-microvolt = <1800000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_1v8_vio>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1143,8 +1142,7 @@
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_module_3v3>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1171,6 +1169,16 @@
>  		regulator-always-on;
>  	};
>  
> +	reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EN_VDD_HDMI";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> +		vin-supply = <&reg_module_3v3>;
> +	};
> +
>  	sound {
>  		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
>  			     "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..6727c5868425 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -1115,8 +1115,7 @@
>  		regulator-min-microvolt = <1800000>;
>  		regulator-max-microvolt = <1800000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_1v8_vio>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1125,8 +1124,7 @@
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_module_3v3>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1153,6 +1151,16 @@
>  		regulator-always-on;
>  	};
>  
> +	reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EN_VDD_HDMI";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> +		vin-supply = <&reg_module_3v3>;
> +	};
> +
>  	sound {
>  		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
>  			     "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..963f26071415 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -965,8 +965,7 @@
>  		regulator-min-microvolt = <1800000>;
>  		regulator-max-microvolt = <1800000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_1v8_vio>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -975,8 +974,7 @@
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  		enable-active-high;
> -		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> -		vin-supply = <&reg_module_3v3>;
> +		vin-supply = <&reg_en_vdd_hdmi>;
>  	};
>  
>  	reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1012,6 +1010,16 @@
>  		regulator-always-on;
>  	};
>  
> +	reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> +		compatible = "regulator-fixed";
> +		regulator-name = "EN_VDD_HDMI";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> +		vin-supply = <&reg_module_3v3>;
> +	};
> +
>  	sound {
>  		compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
>  			     "nvidia,tegra-audio-sgtl5000";
> 

Given Linus W's fix for the gpiolib [0], I am not convinced that this is
really better/needed.

Cheers
Jon

[0] https://lore.kernel.org/patchwork/patch/998354/

-- 
nvpublic