[PATCH v5 0/3] Stingray thermal driver support

[Srinath Mannam]

These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.

Changes from v4
  - Addressed Rob Herring comments on DT parameters and
    thermal driver architecture.
  - Removed brcm,max-crit-temp DT parameter
  - Changed driver to thermal sensor registration model.
  - Added trip DT properties.

Changes from v3
  - Addressed Daniel lezcano comments.
  - Elaborated commit description of thermal driver patch.
  - Added brcm,max-crit-temp DT parameter.

Changes from v2:
  - All stingray TMON DT nodes are combine together into single.
    Temperature registers are combined into one mem resource.
    brcm,tmon-mask parameter has available TMONs mask value.
  - All available TMONs are initialized together in single
    instance of driver probe call.

Changes from v1:
  - Fixed auto build sparce warning.

Pramod Kumar (3):
  dt-bindings: thermal: Add binding document for SR thermal
  thermal: broadcom: Add Stingray thermal driver
  arm64: dts: stingray: Add Stingray Thermal DT support.

 .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++
 drivers/thermal/Kconfig                            |   3 +-
 drivers/thermal/broadcom/Kconfig                   |   9 ++
 drivers/thermal/broadcom/Makefile                  |   1 +
 drivers/thermal/broadcom/sr-thermal.c              | 138 +++++++++++++++++++++
 6 files changed, 344 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
 create mode 100644 drivers/thermal/broadcom/sr-thermal.c

-- 
2.7.4