[PATCH 2/5] brcmfmac: Use common CORDIC_FLOAT macro from lib

From: Priit Laes
Date: Sat Nov 03 2018 - 06:00:22 EST


Now that cordic library has the CORDIC_FLOAT macro, use that

Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 ++--
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 9fb0d9f..e78a93a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -3447,8 +3447,8 @@ wlc_lcnphy_start_tx_tone(struct brcms_phy *pi, s32 f_kHz, u16 max_val,

theta += rot;

- i_samp = (u16) (FLOAT(tone_samp.i * max_val) & 0x3ff);
- q_samp = (u16) (FLOAT(tone_samp.q * max_val) & 0x3ff);
+ i_samp = (u16)(CORDIC_FLOAT(tone_samp.i * max_val) & 0x3ff);
+ q_samp = (u16)(CORDIC_FLOAT(tone_samp.q * max_val) & 0x3ff);
data_buf[t] = (i_samp << 10) | q_samp;
}

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index a57f271..f4f5e90 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -23089,8 +23089,8 @@ wlc_phy_gen_load_samples_nphy(struct brcms_phy *pi, u32 f_kHz, u16 max_val,

theta += rot;

- tone_buf[t].q = (s32) FLOAT(tone_buf[t].q * max_val);
- tone_buf[t].i = (s32) FLOAT(tone_buf[t].i * max_val);
+ tone_buf[t].q = (s32)CORDIC_FLOAT(tone_buf[t].q * max_val);
+ tone_buf[t].i = (s32)CORDIC_FLOAT(tone_buf[t].i * max_val);
}

wlc_phy_loadsampletable_nphy(pi, tone_buf, num_samps);
--
git-series 0.9.1