[PATCH AUTOSEL 4.14 15/30] iio: adc: at91: fix wrong channel number in triggered buffer mode

From: Sasha Levin
Date: Sun Nov 04 2018 - 09:00:16 EST


From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>

[ Upstream commit aea835f2dc8a682942b859179c49ad1841a6c8b9 ]

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/iio/adc/at91_adc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 15109728cae7..3f6fef0bb067 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -248,12 +248,14 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *idev = pf->indio_dev;
struct at91_adc_state *st = iio_priv(idev);
+ struct iio_chan_spec const *chan;
int i, j = 0;

for (i = 0; i < idev->masklength; i++) {
if (!test_bit(i, idev->active_scan_mask))
continue;
- st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+ chan = idev->channels + i;
+ st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, chan->channel));
j++;
}

--
2.17.1