Re: [PATCH v5 0/3] Stingray thermal driver support

[Florian Fainelli]

On 10/16/2018 8:11 AM, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.

Can we get feedback from the thermal maintains whether this is
acceptable or not?

> 
> Changes from v4
>   - Addressed Rob Herring comments on DT parameters and
>     thermal driver architecture.
>   - Removed brcm,max-crit-temp DT parameter
>   - Changed driver to thermal sensor registration model.
>   - Added trip DT properties.
> 
> Changes from v3
>   - Addressed Daniel lezcano comments.
>   - Elaborated commit description of thermal driver patch.
>   - Added brcm,max-crit-temp DT parameter.
> 
> Changes from v2:
>   - All stingray TMON DT nodes are combine together into single.
>     Temperature registers are combined into one mem resource.
>     brcm,tmon-mask parameter has available TMONs mask value.
>   - All available TMONs are initialized together in single
>     instance of driver probe call.
> 
> Changes from v1:
>   - Fixed auto build sparce warning.
> 
> Pramod Kumar (3):
>   dt-bindings: thermal: Add binding document for SR thermal
>   thermal: broadcom: Add Stingray thermal driver
>   arm64: dts: stingray: Add Stingray Thermal DT support.
> 
>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++
>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++
>  drivers/thermal/Kconfig                            |   3 +-
>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/sr-thermal.c              | 138 +++++++++++++++++++++
>  6 files changed, 344 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> 

-- 
Florian