Re: [PATCH] usb: core: Fix hub port connection events lost

[Mathias Nyman]

On 13.11.2018 15:40, Dennis Wassenberg wrote:
> This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset
> only if a device is was attached to the hub port before resetting the hub port.
>
> Using a Lenovo T480s attached to the ultra dock it was not possible to detect
> some usb-c devices at the dock usb-c ports because the hub_port_reset code
> will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset.
> Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the
> actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit.
> This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the
> new device was attached such that it was not detected.
>
> This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is
> currently no device attached to the port before the hub port reset.
> This will avoid clearing the connection bit for new attached devices.
>
> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@xxxxxxxxxxx>
> ---
>   drivers/usb/core/hub.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index c6077d582d29..2731fad6f659 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -2849,7 +2849,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
>   					USB_PORT_FEAT_C_BH_PORT_RESET);
>   			usb_clear_port_feature(hub->hdev, port1,
>   					USB_PORT_FEAT_C_PORT_LINK_STATE);
> -			usb_clear_port_feature(hub->hdev, port1,
> +
> +			if (udev)
> +				usb_clear_port_feature(hub->hdev, port1,
>   					USB_PORT_FEAT_C_CONNECTION);
>   
>   			/*

Acked-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>