[PATCH 6/9] dt-bindings: spi: zynqmp: Move SPI node under zynqmp firmware

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xxxxxxxxxx>

SPI driver uses ZynqMP firmware interface and so it should be
populated by firmware driver.

Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
---
 .../devicetree/bindings/spi/spi-zynqmp-qspi.txt    | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
index 0f6d37f..767bb8e 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -14,12 +14,18 @@ Optional properties:
 - num-cs		: Number of chip selects used.
 
 Example:
-	qspi: spi@ff0f0000 {
-		compatible = "xlnx,zynqmp-qspi-1.0";
-		clock-names = "ref_clk", "pclk";
-		clocks = <&misc_clk &misc_clk>;
-		interrupts = <0 15 4>;
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+		qspi: spi@ff0f0000 {
+			compatible = "xlnx,zynqmp-qspi-1.0";
+			clock-names = "ref_clk", "pclk";
+			clocks = <&misc_clk &misc_clk>;
+			interrupts = <0 15 4>;
+			interrupt-parent = <&gic>;
+			num-cs = <1>;
+			reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
+		};
 	};
+};
-- 
2.7.4