[PATCH v3 0/8] drm/msm/dsi: Get PHY ref clocks from the DT

From: Matthias Kaehlcke
Date: Fri Nov 30 2018 - 19:53:27 EST


The MSM DSI PHY drivers currently hardcode the name and the rate of
the PHY ref clock. Get the ref clock from the device tree instead.

Note: testing of this series was limited to SDM845 and the 10nm PHY

Major changes in v3:
- keep supporting DTs without ref clock for the 28nm and the 28nm
8960 PHYs
- added patch to add ref clock to qcom-apq8064.dtsi

Major changes in v2:
- apply to all MSM DSI PHY drivers, not only 10nm

Matthias Kaehlcke (8):
dt-bindings: msm/dsi: Add ref clock for PHYs
drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT
drm/msm/dsi: 28nm PHY: Get ref clock from the DT
drm/msm/dsi: 14nm PHY: Get ref clock from the DT
drm/msm/dsi: 10nm PHY: Get ref clock from the DT
arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY
arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs
ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY

.../devicetree/bindings/display/msm/dsi.txt | 1 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +--
arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +--
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++---
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 13 ++++++-
drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 16 +++++++--
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 35 ++++++++++++++-----
.../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 28 ++++++++++++---
8 files changed, 87 insertions(+), 26 deletions(-)

--
2.20.0.rc1.387.gf8505762e3-goog